Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Brand & Model: Kollmorgen / Servotronix / Staubli Joint-Axis Servo Drive — PRD-0046000Z-25 (Revision L3)
- Physical Dimensions: Approximately 65 mm x 240 mm x 210 mm (Enclosure chassis profile)
- Estimated Shipping Weight: 2.1 kg (Requires heavy-duty corrugated packaging with molded polyethylene cushioning inserts)
- What’s in the Box: Digital servo amplifier module enclosed in an antistatic ESD shield bag, pluggable control and power mating connector headers, and factory inspection compliance tags. (Note: External braking resistors and multi-axis backplane communication wiring harnesses are sold separately).
2.Product Introduction
This high-performance servo amplifier mounts securely inside Staubli CS8C robot controller cabinets, managing precision multi-axis motion for heavy industrial manipulators like the RX160 series. Automation technicians bolt the anodized heatsink chassis directly onto the internal cold-plate backplane, relying on high-density internal digital signal processors to execute deterministic motion profiles under severe operational loads.
System reliability depends strictly on utilizing certified OEM-matched motion hardware rather than unverified generic replacements. Deploying this exact servo drive guarantees precise current loop tuning and safe torque-off (STO) response parameters, preventing erratic robotic arm trajectories and unexpected emergency stop trips on the production floor.
3.Core Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer / Series | Kollmorgen / Servotronix / Staubli CS8C Architecture |
| Part Number | PRD-0046000Z-25 (Alternate: PRD-0046000-25) |
| Application Target | Staubli RX160 / RX160L Industrial Articulated Robots |
| Operating Bus / Control | High-speed digital motion bus interface |
| Cooling Methodology | External cold-plate / Internal forced convection heatsink |
| Operating Temperature | 0°C to +40°C panel ambient threshold |
| Enclosure Rating | IP20 cabinet-mounted module |
| Approximate Weight | 2.1 kg (4.63 lbs) |
- Global Compliance & Industry Certifications
Auditors require full documentation proving that high-power robotic servo hardware satisfies international electrical safety mandates. This drive aligns with essential global benchmarks, carrying expected designations such as the CE Mark for European machinery directive compliance, UL/cUL listing for industrial control panels, and functional safety standards covering safe torque-off operations.
A proper UL rating ensures that internal power stage switching semiconductors and bus-bar isolation barriers will safely contain high-voltage DC bus faults, protecting maintenance personnel from catastrophic arc-flash hazards during troubleshooting. Verify specific lot certifications with OEM.
5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine)
Precision servo drives stored in plant warehouses for extended periods require strict environmental controls to prevent DC-bus capacitor degradation and internal logic board oxidation. Keep the unit hermetically sealed inside its original factory anti-static moisture-barrier bag until the exact day of physical cabinet integration. Maintain stockroom climate conditions with relative humidity strictly below 60 percent and ambient temperatures stable between 10°C and 30°C to protect conformal-coated circuit cards from micro-corrosion. If the amplifier sits unpowered in stock beyond three years, maintenance engineers must execute a controlled variable-voltage DC bus pre-charge procedure (formatting the electrolytic bulk capacitors) to prevent dielectric breakdown upon initial power-up.
- Physical Installation Prerequisites
Mount the amplifier vertically onto the designated cold-plate or conductive backplane inside the robot controller cabinet, maintaining a minimum vertical clearance of 80mm above and below the chassis to ensure optimal airflow across the heatsink fins. Verify that the cabinet protective earth (PE) copper braid bolts securely to the drive grounding stud with a low-impedance connection, eliminating high-frequency electrical noise emissions that interfere with absolute encoder feedback signals.
- Buyer’s FAQ (Logistics & Compliance Focus)
- What Harmonized System (HS) tariff code governs international shipments of this servo drive? Multi-axis motor controllers and industrial servo amplifiers typically fall under HS code 8504.40 (static converters and power supplies), though import brokers should verify regional classifications.
- Does the drive ship pre-loaded with robot-specific firmware and motion parameters? Hardware typically arrives flashed with baseline device firmware matching revision stamps (such as Rev L3), but system integrators must download and apply the specific robot kinematic configuration files via the controller software before commissioning.
- How does the Country of Origin (COO) impact trade compliance documents? Official manufacturing country documentation must match commercial export declarations precisely to pass customs clearance without incurring secondary duty audits or trade delays.
- What insurance protocols are recommended for freight transit? Full-value commercial transit insurance coupled with tilt-indicator and shock-watch labels is mandatory to protect high-value motion control electronics from rough handling during delivery.
The Kollmorgen S20360-SRS is an all-digital Kollmorgen CP303250: Power Block Architecture and Thermal Management Kollmorgen SERVOSTAR 406A-C Digital Servo Drive
