Description
Looking to bridge your legacy distributed I/O blocks back to a central host controller over a reliable network? The GE Fanuc IC670GBI002H functions as a Field Control Genius Bus Interface Unit (BIU). This specialized network node controller mounts directly onto a Field Control I/O terminal base, coordinating the bidirectional exchange of discrete and analog I/O data between local hardware modules and a parent Genius bus master network scanner.
Global Logistics & Procurement Overview
Navigating the replacement or maintenance of legacy, lifecycle-managed control platforms requires meticulous coordination around component sourcing, certifications, and international transit safety.
Availability and Lead Time
- Condition: New Original (New Surplus) or fully certified Refurbished (tested) variants available.
- Warranty: 12-month comprehensive warranty protecting all communication circuitry.
- Lead Time: Ships from our localized stock reserves within 1 to 2 business days upon order verification.
- Pricing Note: Because the GE Field Control product family is within a legacy support phase, market pricing adjusts based on localized warehouse scarcity and active industrial demand. The listed price serves as a reference; contact our sales office directly to obtain a formal, quote-ready pricing breakdown.
International Shipping & Trade Compliance
Cross-border transit for critical legacy PLC hardware requires strict regulatory adherence to clear customs nodes without operational delays.
- Incoterms: Standard distribution terms follow EXW (Ex Works) or CIP (Carriage and Insurance Paid to destination), establishing clear, legally defined liability handover markers.
- Customs Clearance & HS Code: This module is internationally classified under HS Code 85389091 (Electronic assemblies for industrial programmable controllers). Ensure your export-import documentation specifies this designation to avoid border holding periods.
- Logistics Options: Critical machinery downtime scenarios necessitate priority express air freight (DHL, FedEx, or UPS), typically delivering to your receiving deck within 3 to 5 business days globally. Regular stock replenishment runs utilize deferred economy air to optimize shipping overhead.
Technical Specifications
Every parameter must line up with your existing industrial network topology to ensure software compatibility upon insertion.
| Parameter | Specification |
| Manufacturer | GE Fanuc / GE Industrial Automation |
| Product Line | Field Control I/O Series |
| Model Number | IC670GBI002H (Revision H) |
| Device Type | Genius Bus Interface Unit (BIU) |
| Network Protocol | Genius Bus (Global Data & Datagram capabilities) |
| Supported Data Rates | 153.6 kbaud standard, 153.6 kbaud extended, or 38.4 kbaud |
| Local Module Support | Up to 4 Field Control I/O modules per BIU node |
| Input Voltage Window | 24 V DC nominal (Operational variance: 18 to 30 V DC) |
| Power Consumption | Maximum 350 mA at 24 V DC |
| Isolation Barrier | 1,500 V AC between Genius network lines and local I/O logic |
Field Application & Hardware Integration
In field deployments of Genius network systems, forgetting to set the physical hardware node address is the fastest way to cause a bus-wide configuration failure. Well, technically the IC670GBI002H retains its target configuration once programmed via a handheld monitor or the PLC software configuration tool, but you must manually assign a unique Genius Block ID (ranging from 0 to 31) to prevent communication collisions on the twisted-pair cable trunk—verify your network address schedule before bringing the node online.
During a recent material handling upgrade at an automotive parts warehouse, a maintenance crew deployed this specific BIU to swap out an older Revision E module that had developed an intermittent communication fault. The upgrade path was straightforward. Because the unit features a quick-disconnect baseplate design, the crew simply unlocked the main electronic block face, left the field network wiring untouched on the terminal strip, and snapped the Revision H module directly into place.
Keep a close eye on the shielding and termination resistors across your Genius bus lines. In my experience, if this module sits at the physical end of a long network run, you must bridge a terminal matching resistor—either 75, 100, or 150 ohms depending on the cable specification—directly across the Serial 1 and Serial 2 terminals. Neglecting this physical termination induces signal reflection, causing adjacent nodes on the bus to drop offline intermittently with unprompted “Bus Loss” diagnostic flags.
GE Fanuc IC670GBI002H Procurement FAQ
Does this BIU arrive with the required wiring base block included?
No. The IC670GBI002H part number specifies the bare plug-in electronic module assembly. The underlying I/O terminal base block (such as an IC670TBS001 or matching box-style block) must be retained from your existing system setup or purchased as a standalone mechanical item.
Can I mix analog and discrete modules on a single BIU node?
Yes, the internal processor architecture supports variable combinations of discrete and analog Field Control I/O modules on the same local cluster, provided the total current drawn across the internal bus does not exceed the unit’s maximum 24V supply limitations.
How can I verify that the module is communicating properly with the master scanner?
On the front face of the module, look at the LED indicator array. A steady, solid “I/O Enabled” or “Comm” LED indicates successful token passing and processing sync with the parent Genius bus master module. A blinking pattern typically flags an unconfigured block or a mismatch in your Control First software I/O tree.
