Description
Unboxing & Hardware Overview
- Manufacturer & Architecture: Bently Nevada (Baker Hughes) / 3500 Machinery Protection System
- Part Number / Ordering Code: 3500/22-01-01-01138607-01 (incorporating base model 3500/22M, standard configuration options, and module part number 138607-01)
- Product Type: Standard Transient Data Interface (TDI) Module and I/O Assembly
- Physical Dimensions: Standard 3500 rack module format (occupies Slot 1 adjacent to the power supplies)
- Estimated Shipping Weight: ~2.0 lbs (0.91 kg) enclosed in specialized anti-static ESD packaging and structural cushioning
- Primary Condition Status: Factory New / New Surplus / Refurbished Tested options available (verify specific lot status with provider prior to dispatch)
Product Introduction
The Bently Nevada 3500/22-01-01-01138607-01 configuration represents the 3500/22M Transient Data Interface (TDI) module paired with its corresponding I/O component. The TDI acts as the critical gateway between the 3500 machinery protection system and host software platforms—such as System 1 condition monitoring software and the 3500 configuration software.
It merges the traditional functions of a Rack Interface Module (RIM) with the high-speed data collection capacity of a communication processor, gathering both steady-state (static) and transient dynamic (waveform) data from all M-series monitor modules in the rack and routing it seamlessly via Ethernet.
Core Technical Specifications
| Parameter | Value |
| Product Model | 3500/22M TDI Module (Part No. 138607-01) |
| System Compatibility | Bently Nevada 3500 Series Machinery Protection Systems |
| Communication Ports | 1x Front Panel USB-B (for local diagnostics/configuration), Dual Ethernet options via I/O module |
| Supported Protocols | BN Host Protocol, BN TDI Protocol |
| Data Collection | Static variables & dynamic transient waveforms (synchronous/asynchronous capture) |
| Operating Temperature | -30°C to +65°C (-22°F to +149°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | Up to 95% non-condensing |
Compliance & Standards Alignment
- Designed to meet rigorous industrial electromagnetic compatibility (EMC) and environmental standards required for heavy machinery protection environments.
- Conforms to applicable CE, CSA, and hazardous location classifications depending on exact suffix options specified during initial factory procurement.
Technical Note: The TDI module is non-critical to the primary machinery protection path; its failure or removal will not inhibit the basic trip logic or monitoring execution of individual M-series protection cards in the rack.
Storage & Asset Preservation Guidelines
- Keep the module hermetically sealed inside its original metallized anti-static (ESD) shielding bag to protect internal microprocessors and communication circuitry from static discharge.
- Store spares in an environment where relative humidity remains strictly below 60% to prevent micro-corrosion on backplane pins.
- Avoid mechanical shocks or vibration exposure during warehouse shelf storage.
Physical Installation Prerequisites
- Ensure the target 3500 rack backplane power is safely managed or switch off rack power before inserting or extracting Slot 1 system modules.
- Align card edges smoothly with the chassis guide slots, pressing firmly until the rear connectors mate securely with the 3500 backplane pin-fields.
- Fasten top and bottom front-panel securing screws to guarantee firm mechanical ground connection and structural stability.
Buyer’s FAQ & Logistics
Q: What Harmonized System (HS) code applies to the international shipment of this TDI module?
A: Industrial monitoring system cards and data processors typically classify under HS code 8538.90 (parts suitable for use solely or principally with control apparatus). Confirm final categorization with your licensed customs broker.
Q: Does the 138607-01 require separate software setup?
A: Yes, initial network IP configuration, node naming, and rack communication parameters must be established through the Bently Nevada 3500 System Configuration software suite.
Q: Is the listed online price final for procurement?
A: Note: Price is subject to market conditions and available surplus inventory levels; contact our technical sales desk for a formal, time-sensitive quotation.
