Description
1. Unboxing & Physical Snapshot
- Model & Brand: ABB Measurement & Analytics / Advance Optima Series Sample Gas Cooler (Part No. SCC-C 23070-0-102321100000)
- Physical Dimensions (Approximate W x H x D): 1/2 19-inch width, 6 height units (6 HU / approx. 266.0 mm x 302.0 mm depth).
- Estimated Shipping Weight: 14.00 kg (30.86 lbs).
- What’s in the Box: Surface-mounting sample gas cooler module, integrated heat exchanger blocks, condensate traps, electronic temperature regulation circuitry, corrosion-proof gas connectors, mounting hardware, and manufacturer compliance documentation.
2. Product Introduction
Continuous emissions monitoring systems (CEMS) and industrial process gas analyzers require robust sample conditioning sub-assemblies to lower hot, moisture-laden gas streams down to a stable dew point reliably. This ABB SCC-C sample gas cooler integrates directly into Advance Optima analyzer systems—which is vital for removing water vapor cleanly from corrosive flue gases across independent sample paths prior to optical or electrochemical analysis.
The heavy-duty sheet steel enclosure protects internal Peltier or compressor cooling modules and electronic temperature controllers from industrial dust and ambient exposure. Maintaining a constant, low sample dew point, this hardware prevents moisture damage and measurement drift in complex process analysis lines.
3. Core Technical Specifications
| Parameter | Value |
| Device Type | Sample Gas Cooler and Conditioning Module (SCC-C Series) |
| Series Compatibility | ABB Advance Optima (AO2020 / AO2040) Analyzer Systems |
| Gas Path Configuration | Independent sample gas paths with corrosion-resistant heat exchangers |
| Power Supply Requirements | 230 V AC or 115 V AC, 50/60 Hz nominal input |
| Power Consumption | Maximum 200 VA |
| Operating Temperature Range | +5 °C to +45 °C (+41 °F to +113 °F operational limits) |
| Enclosure Protection Class | IP20 surface-mounting housing classification |
| Sample Gas Inlet Temperature | Maximum +70 °C (depending on flow rate configuration) |
4. Global Compliance & Industry Certifications
- Expected Regulatory Approvals: CE Mark, CSA Safety Certification (CAN/CSA-C22.2 No. 61010-1), IEC 61010-1 compliance, and RoHS environmental directives.
- Safety & Compliance Impact: Compliance with stringent international laboratory and industrial safety standards guarantees that internal thermal control cut-offs and fluid containment systems prevent hazardous leaks and electrical hazards during continuous operation.
- Verify specific lot certifications with OEM.
5. Long-Term Storage & Asset Preservation Guide
Keep this gas cooler module sealed inside its original moisture-barrier and anti-static packaging to protect internal electronics and metal-free pneumatic components from environmental corrosion. Crucial Pre-Storage Note: Ensure all internal condensate traps and heat exchanger lines are completely purged, dried, and drained before warehousing to prevent biological growth or structural degradation from trapped moisture. Maintain indoor storage conditions at a relative humidity level strictly below 60%.
6. Physical Installation Prerequisites
- Verify that the mounting plate or 19-inch rack structure is stable and capable of supporting the full 14 kg unit weight prior to installation.
- Maintain a clearance gap of at least 5 cm around the ventilation louvers of the enclosure to allow unobstructed cooling airflow through the heat dissipation system.
- Connect sample gas inlet lines securely using corrosion-resistant tubing, ensuring sample lines are thermally insulated to prevent premature condensation before entering the cooler.
7. Buyer’s FAQ (Logistics & Compliance Focus)
- Q: What Harmonized System (HS) code applies for international customs clearance on this ABB SCC-C unit?
- A: Gas analysis apparatus, industrial monitoring instruments, and sample conditioning coolers typically classify under HS code 9027.90 or 8415.82. Confirm local code accuracy with your trade compliance broker.
- Q: Does this hardware ship configured for 115V or 230V power supplies?
- A: Units are factory-configured based on specific part number digits. Field technicians must verify that line voltage matches the power supply specification label before energizing the system.
- Q: How does the Country of Origin (COO) documentation affect our import compliance audit?
- A: Manufacturing origin records correspond to authorized global production facilities within ABB’s analytical measurement division. Check commercial invoice documentation for precise country details to satisfy trade treaty requirements.
- Q: Is specialized transit insurance recommended during shipment?
- A: Yes. Because gas conditioning units contain delicate internal electronic temperature controllers, glass/metal heat exchangers, and precision components, comprehensive transit insurance guarding against mechanical shock and vibration damage is strongly advised.
- A: Yes. Because gas conditioning units contain delicate internal electronic temperature controllers, glass/metal heat exchangers, and precision components, comprehensive transit insurance guarding against mechanical shock and vibration damage is strongly advised.
