Description
- Model & Brand: ABB / CC Series (Part No. 1SVR040007R0200 / CC-U/I Universal Signal Converter)
- Physical Dimensions: Compact modular DIN-rail housing profile (105 mm x 22.5 mm x 120 mm)
- Estimated Shipping Weight: 0.155 kg (Packaged in multi-layer anti-static ESD shielding and retail carton)
- What’s in the Box: CC-U/I signal converter module, pluggable screw terminal blocks, and factory calibration/test sheet.1.Product Introduction
Industrial automation loops require precise signal conversion and electrical isolation to prevent ground loops and protect sensitive control inputs from high-voltage transients. System engineers integrate the ABB CC-U/I Universal Signal Converter (Part No. 1SVR040007R0200) directly into control cabinet DIN-rail layouts, managing current RMS signal measurements (such as 0–1A or 0–5A) and converting them into standardized industrial control signals (—which is vital for protecting PLC analog input cards and maintaining measurement accuracy across heavy industrial distribution environments).
Cabinet technicians must ensure proper DIP-switch configuration for range scaling and maintain clean wire segregation to prevent electromagnetic noise coupling into sensitive measurement lines.
2.Core Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer / Series | ABB / CC-U Series |
| Device Type | Universal Signal Converter / Current Measuring Unit |
| Rated Control Supply Voltage (U_s) | 110–240 VAC (50/60 Hz) / 100–300 VDC |
| Input Signal Ranges | Current RMS values: 0–1 A / 0–5 A |
| Accuracy | \pm0.5% of full-scale value |
| Response Time | 150 ms |
| Operating Temperature | -20°C to +60°C ambient enclosure range |
| Enclosure Protection | IP20 modular housing with pluggable terminal blocks |
3.Global Compliance & Industry Certifications
Auditors inspecting industrial control panels and signal interface networks require strict documentation verifying electrical safety, isolation, and electromagnetic compatibility.
- CE Mark: Confirms conformity with European Union directives covering electromagnetic compatibility (EMC) and low-voltage safety.
- UL / cUL Recognized: Validates North American industrial standards for auxiliary control and signal conversion devices.
- IEC Standards: Complies with international specifications for industrial control and measuring equipment.
- RoHS Compliance: Restricts hazardous chemical substances in electronic component manufacturing.
Compliance Note: Compliance with industrial isolation standards ensures that internal galvanic separation barriers prevent dangerous fault voltages from propagating from field sensors back to central PLC processing racks. Verify specific test certificates with ABB prior to facility compliance audits.
4.Long-Term Storage & Asset Preservation Guide
Dormant signal converters stored in warehouse stockroom bins face terminal micro-corrosion and electronic component aging if environmental parameters escape strict control limits.
Keep the module sealed tightly inside its original anti-static (ESD) packaging to safeguard internal microprocessors and scaling circuits from static discharge. Maintain warehouse storage temperatures between -40°C and +85°C with relative humidity kept strictly below 95% non-condensing to prevent terminal oxidation on the pluggable screw blocks. Ensure the hardware remains protected from heavy physical drop forces that could crack the modular polyamide housing.
5.Physical Installation Prerequisites
DIN-rail structural stability and vertical airflow clearances dictate precise physical placement inside the control cabinet. Ensure power to the cabinet is completely locked out (LOTO) prior to handling. Snap the module securely onto a standard 35 mm DIN rail, verifying that configuration DIP switches on the side of the housing are accurately set for your specific input/output ranges before landing field wiring.
6.Buyer’s FAQ (Logistics & Compliance Focus)
- What is the correct HS Tariff Code for international customs clearance?Industrial signal converters and measuring relays classify under harmonized code 8536.90.85 (or regional equivalent 8538.90), though exact regional rulings should be verified with your broker.
- Does this signal converter require pre-loaded system software?Hardware assembly 1SVR040007R0200 operates via hardware-based analog processing and front/side DIP-switch configuration; no software programming is required.
- How does the Country of Origin (COO) impact global trade compliance?The verified COO dictates trade agreement qualification and must match commercial shipping paperwork to eliminate border customs clearance delays.
- Why is comprehensive transit insurance mandatory for this component?Precision internal calibration circuits, multi-layer printed circuit boards, and modular terminal blocks can suffer structural strain or calibration drift under severe drop impacts during freight transit.
