Description
1. At-A-Glance Executive Brief
- Model: 1KGT022200R0001 (560SFR02 R0001)
- Brand: ABB
- Part Type: 19-inch Swing Frame Rack Unit
- Weight: 2.0 kg
- System compatibility: ABB RTU560 Remote Terminal Unit Architecture
2. Technical Introduction
- Engineer’s Takeaway: The ABB 1KGT022200R0001 swing frame rack provides the physical and electrical backbone for high-density RTU560 deployments, eliminating backplane bottlenecks through structured F-type edge connection technology.
Substation automation upgrades frequently hit physical constraints when legacy enclosures lack the slot capacity or power distribution infrastructure required for expanded telemetry and control cards. Technicians struggling with space limitations or failing rack connectors risk prolonged outages during hardware retrofits. The ABB 560SFR02 rack drops into standard 19-inch cabinets, supporting up to 18 slots for I/O modules and communication units while accommodating dual power supply units for complete system redundancy.
3. Core Technical Specifications
- Manufacturer: ABB
- Catalog Designation: 560SFR02 R0001
- Dimensions: 132.8 mm x 482.6 mm x 210 mm (3U, 19-inch)
- Slot Capacity: Up to 18 slots for I/O boards and CMUs
- Connection Technology: Indirect 48-pole Type F DIN 41612 edge connectors
- Power Monitoring: Dedicated plug-in terminal strips for 5V/24V internal voltage supervision
- Environmental Tolerance: Please refer to the OEM datasheet for complete environmental tolerances.
4. Field Engineer’s Tech Notes
- DIN 41612 Pin Alignment: When sliding high-density I/O cards or communication units into the 560SFR02 backplane, verify that sub-connectors snap cleanly into the Type F edge pins without lateral force; misalignment can bend backplane pins and compromise internal 5V/24V rail distribution.
- Redundant Alarm Wiring: Tie the plug-in terminal strips for internal voltage monitoring (X11 through X15) into your station Annunciator or SCADA digital inputs immediately during installation, as the normally closed relay contacts trip on any primary power supply degradation.
5. Adaptive QA & Testing Protocol
Our testing workflow for rack chassis and backplanes focuses on mechanical integrity and electrical bus continuity. We inspect all 48-pole DIN 41612 connector pins for gold-plating wear, oxidation, or structural deflection. Continuity sweeps are executed across the internal power distribution rails to confirm zero impedance on ground paths and backplane voltage delivery buses. Inspection documentation and quality verification checklists are available upon request.
6. Buyer’s FAQ
- Q: What warranty applies to this rack unit?A: All hardware purchases include a standard 12-month replacement warranty covering structural and electrical integrity.
- Q: How is the chassis packaged for safe delivery?A: Each swing frame rack is bolted into custom-fitted foam inserts and heavy-duty corrugated cartons to prevent frame distortion during freight transit.
- Q: Is this part supplied as new surplus or refurbished?A: Inventory status is clearly marked as New Surplus (NSFP) or verified factory-original hardware; contact our sales desk for current batch details.
