Description
1. Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: Siemens 6ES7193-1CL10-0XA0 (SIMATIC ET 200L Terminal Block TB32L)
- Physical Dimensions: Approximately 150mm x 50mm x 40mm (W x H x D)
- Estimated Shipping Weight: 0.3 kg (boxed with static-dissipative protective packaging)
- What’s in the Box: 1x 6ES7193-1CL10-0XA0 TB32L terminal block sealed inside factory protective packaging, integrated spring-type connection slots, labeling strips, and OEM compliance documentation.
2. Product Introduction (Structure C: Compliance Hook)
Regulatory compliance governs every decision inside high-consequence process environments, requiring hardware certified to strict international safety thresholds. Operating distributed I/O architectures demands terminal components carrying transparent documentation and traceable manufacturing histories to pass independent safety audits.
The Siemens 6ES7193-1CL10-0XA0 satisfies these rigorous verification protocols through precise electrical isolation boundaries and documented thermal limits. (We always inspect the physical laser-etched part numbers against the accompanying Certificate of Conformance during incoming receiving inspections.)
3. Core Technical Specifications
| Parameter | Value |
| System Compatibility | SIMATIC ET 200L distributed I/O automation environments |
| Module Type | TB32L Terminal Block (32-channel configuration) |
| Terminal Technology | Spring-type (spring-loaded) connection system |
| Channel Capacity | 32 digital or signal terminal points |
| Operating Temperature | 0°C to +60°C (natural convection cooling) |
| Storage Temperature | -40°C to +70°C |
| Enclosure Protection | IP20 rating per IEC 60529 |
| Mounting Standard | Standard DIN rail or wall-mounting configurations |
4. Global Compliance & Industry Certifications
Auditors demand verifiable documentation confirming that distributed control components comply with rigorous electrical safety mandates before plants resume operation.
- Expected Certifications: CE Mark, UL/cUL Listed (Industrial Control Equipment), CSA certification, and VDE conformity.
- Compliance Significance: UL listings verify that internal terminal spacing and insulating materials prevent dielectric breakdown under surge conditions. (Class I Div 2 ratings ensure zero risk of spark ignition within classified hazardous plant sectors.) Verify specific lot certifications with OEM documentation before closing out compliance audits.
5. Long-Term Storage & Asset Preservation Guide
Warehouse storage destroys unprotected electronics if humidity and environmental hazards go unmanaged. Keep this asset safe:
- Store the terminal block sealed tightly inside its original protective packaging to block atmospheric moisture and dust accumulation.
- Maintain warehouse relative humidity strictly below 60% to prevent oxidation on the internal spring-clamp contacts and wire connection points.
- Lay the unit flat on static-dissipative foam pads to absorb structural building vibrations and prevent physical stress on the molded polymer frame.
6. Physical Installation Prerequisites
Proper mechanical placement guarantees longevity and prevents localized stress concentrations inside the cabinet enclosure.
- Convection Clearance: Leave at least 30mm of open space above and below the terminal block assembly to permit proper vertical airflow across adjacent electronic modules.
- Wiring Protocol: Insert stripped solid or fine-stranded wires directly into the spring-type terminals using proper tooling to ensure secure, vibration-resistant contact retention.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: Which Harmonized System (HS) code applies to international customs clearance for the 6ES7193-1CL10-0XA0?
A: This terminal block module typically clears under HS code 8538.90, but importers should confirm final classification with their broker according to local destination rulings.
Q: Does this surplus unit come with labeling strips and accessories included?
A: New surplus hardware ships complete with original factory-provided labeling elements as specified by the OEM pack; check your installation layout requirements prior to deployment.
Q: How does the declared Country of Origin (COO) influence international shipping paperwork?
A: The COO—typically Germany for this manufacturing run—dictates preferential duty rates under international trade agreements, making a verified certificate of origin essential.
