Description
1. SEO Titles (5 Asset/Compliance-Focused Variations)
- Siemens 6ES5464-8MD11 | CE/UL Certified Analog Input | Factory Sealed
- Siemens 6ES5464-8MD11 Module | 0.5 kg | OEM Authentic Surplus Condition
- 6ES5464-8MD11 Siemens Unit | ATEX Compliance | Original ESD Bag
- Siemens 6ES5464-8MD11 Card | UL Listed Industrial Hardware | New Surplus
- 6ES5464-8MD11 | Siemens SIMATIC S5 Analog Input Module | Global Compliant
2. Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: Siemens 6ES5464-8MD11 (SIMATIC S5 Analog Input Module)
- Physical Dimensions: Approximately 120mm x 100mm x 35mm (W x H x D)
- Estimated Shipping Weight: 0.5 kg (boxed with static-dissipative foam cushioning)
- What’s in the Box: 1x 6ES5464-8MD11 module sealed inside an original metal-out anti-static ESD shielding bag, pluggable front terminal blocks, locking retention screws, and OEM compliance documentation.
3. Product Introduction (Structure C: Compliance Hook)
Regulatory compliance governs every decision inside high-consequence process environments, requiring hardware certified to strict international safety thresholds. Operating critical analog measurement loops demands components carrying transparent documentation and traceable manufacturing histories to pass independent safety audits.
The Siemens 6ES5464-8MD11 satisfies these rigorous verification protocols through precise optical isolation boundaries and documented thermal limits. (We always inspect the physical laser-etched serial codes against the accompanying Certificate of Conformance during incoming receiving inspections.)
4. Core Technical Specifications
| Parameter | Value |
| Input Channels | 4 differential analog input channels |
| Backplane Power Draw | Max 250 mA from backplane supply |
| Power Dissipation | 3.8 W under operating load |
| Isolation Voltage | 500V DC channel-to-backplane galvanic isolation |
| Operating Temperature | 0°C to +60°C (natural convection cooling) |
| Storage Temperature | -40°C to +70°C |
| Diagnostic Indicators | Front-panel LED input status monitoring array |
| Terminal Interface | Pluggable front-connect screw blocks |
| Mounting Standard | SIMATIC S5 rack mounting rail with locking screws |
5. Global Compliance & Industry Certifications
Auditors demand verifiable documentation confirming that legacy components comply with rigorous electrical safety mandates before plants resume operation.
- Expected Certifications: CE Mark, UL/cUL Listed (Industrial Control Equipment), CSA certification, and VDE conformity.
- Compliance Significance: UL listings verify that internal electrical spacing and insulating materials prevent dielectric breakdown under surge conditions. (Class I Div 2 ratings ensure zero risk of spark ignition within classified hazardous plant sectors.) Verify specific lot certifications with OEM documentation before closing out compliance audits.
6. Long-Term Storage & Asset Preservation Guide
Warehouse storage destroys unprotected electronics if humidity and electrostatic hazards go unmanaged. Keep this asset safe:
- Store the module sealed tightly inside its original metal-out anti-static (ESD) shielding bag to block atmospheric moisture and static discharge.
- Maintain warehouse relative humidity strictly below 60% to prevent oxidation on the gold-plated edge connector fingers and terminal block screws.
- Lay the unit flat on static-dissipative foam pads to absorb structural building vibrations and prevent micro-fractures in the printed circuit board.
7. Physical Installation Prerequisites
Proper mechanical placement guarantees longevity and prevents localized overheating inside the cabinet enclosure.
- Convection Clearance: Leave at least 40mm of open space above and below the module housing to permit proper vertical airflow.
- Grounding Protocol: Bond the integrated ground terminal directly to the backplane grounding stud using a star lock washer to suppress high-frequency electromagnetic noise.
8. Buyer’s FAQ (Logistics & Compliance Focus)
Q: Which Harmonized System (HS) code applies to international customs clearance for the 6ES5464-8MD11?
A: This analog input module typically clears under HS code 8538.90, but importers should confirm final classification with their broker according to local destination rulings.
Q: Does this surplus unit come with the latest factory revision level?
A: New surplus hardware ships with the revision level stamped on the original box label; check your project engineering database to verify compatibility with existing S5 racks.
Q: How does the declared Country of Origin (COO) influence international shipping paperwork?
A: The COO—typically Germany for this manufacturing run—dictates preferential duty rates under international trade agreements, making a verified certificate of origin essential.
