SST 5136-DNP-PCI Host Interface Board | Net Weight 0.40 kg | Authentic OEM Spare

Description

1.Unboxing & Physical Snapshot (Dynamic List)

• Model & Brand: SST (Woodhead / Molex / ProSoft Technology) (Part Number: 5136-DNP-PCI / DNP3 Protocol PCI Communication Card)

• Physical Dimensions: Standard full-height short-length PCI expansion card profile (Approximately 175 mm × 107 mm × 20 mm)

• Estimated Shipping Weight: 0.40 kg (Including anti-static shielding packaging and export carton)

• What’s in the Box: SST 5136-DNP-PCI communication card, adapter cable kit, driver/manual documentation link insert, factory test report, and safety compliance insert.

• 2.Product Introduction (Randomized Structural Hook) Operating inside industrial host computers, SCADA workstations, and telemetry servers interfacing with electrical power substations or water management networks, this specialized communication card encounters continuous electrical transients and ground potential differences. The high-speed processor and multi-port serial interface architecture require strict galvanic isolation and robust protocol parsing to handle DNP3 level telemetry data transactions accurately without dropping data packets or freezing the host PC bus.

Engineered specifically for standard PCI expansion slots in industrial PC enclosures, the card slides securely into chassis slots where reliable utility data exchange and master/slave communication are mandatory. Every onboard transceiver and gold-plated edge connector is built to sustain round-the-clock operation in severe utility and manufacturing environments.

3.Core Technical Specifications | Parameter | Value | | :— | :— |

| Manufacturer / Family | SST (Woodhead / Molex) / DNP3 Protocol PCI Communication Series (5136-DNP-PCI) |

| Bus Interface | Standard 32-bit PCI Host Bus |

| Communication Ports | Isolated RS-232/422/485 serial ports (DNP3 protocol support) |

| Power Consumption | Draw from PCI slot (+5 V DC bus) |

| Operating Temperature Range | 0°C to +50°C |

| Enclosure Protection Class | IP20 (Requires certified industrial PC cabinet installation) |

| Net Weight | 0.250 kg |

4. Global Compliance & Industry Certifications Utility operators and electrical safety auditors will immediately reject any uncertified communication hardware integrated into substation control servers. This hardware tier aligns with stringent international benchmarks.

• Expected Certifications: CE Mark, UL/cUL Recognized, FCC Part 15 Class A, and RoHS environmental compliance.

• Compliance Significance: The UL and CE designations confirm that internal low-voltage insulation barriers and optical isolation circuits satisfy rigorous safety standards, mitigating electrical surge and short-circuit risks during active utility automation tasks. (Verify specific lot certifications with OEM).

• 5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine) Critical PC-based communication spares kept in warehouse reserve require strict environmental oversight to prevent silent degradation of internal components prior to active commissioning.

• Maintain a climate-controlled storage facility where ambient relative humidity stays strictly below 60 percent, preventing moisture accumulation from oxidizing gold-plated PCI edge connector fingers and solder traces.

• Keep the board permanently sealed inside its original anti-static (ESD) shielding bag and moisture-barrier packaging to protect sensitive integrated microcircuits from electrostatic discharge.

• If storage exceeds a three-year cycle, have an instrument technician inspect all edge connector pins and check onboard components for physical wear before field staging.

• 6.Physical Installation Prerequisites Industrial PC chassis layout requires strict adherence to motherboard spacing and grounding specifications to maintain signal integrity.

• Ensure the host PC power is completely disconnected before inserting or removing the PCI expansion card to prevent backplane damage.

• Secure the card’s metal bracket firmly to the chassis using the retention screw to establish a low-impedance ground bond directly to the PC enclosure ground bus.

• 7.Buyer’s FAQ (Logistics & Compliance Focus)

• Q: What Harmonized System (HS) code applies to international shipments of this PCI communication card?

  • A: Industrial computer interface cards, network adapters, and telemetry modules typically fall under HS code 8473.30 or 8517.62. Verify exact classifications with your customs broker.

• Q: Does this hardware arrive pre-configured with DNP3 database maps?

  • A: Replacement inventory ships as baseline hardware; specific DNP3 object points, station addresses, and serial communication parameters must be configured via SST/ProSoft configuration software during commissioning.

• Q: How does the Country of Origin (COO) impact preferential import tariffs?

  • A: Manufacturing origin typically traces to the United States (US) or authorized global manufacturing facilities, which influences preferential trade documentation and duty calculations.

• Q: Is specialized transit insurance mandatory for freight forwarding?

  • A: Yes, given the delicate electronic components and gold-edge contacts of PCI expansion cards, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.