Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Brand & Model: Kollmorgen / Danaher Motion S200 Series Digital Servo Drive — S20660-SRS
- Physical Dimensions: Approximately 175.0 mm (H) x 64.0 mm (W) x 131.6 mm (D)
- Estimated Shipping Weight: 1.1 kg (Packaged within high-density antistatic foam inserts)
- What’s in the Box: Digital servo drive unit housed in an antistatic shielding bag, pluggable terminal power connectors, and factory compliance certificates. (Note: SynqNet network patch cables and mating motor power plugs are ordered separately).
2.Product Introduction
This digital servo amplifier slides vertically onto panel backplates within multi-axis motion control cabinets, linking directly to deterministic SynqNet communication networks via dual RJ-45 ports on the front faceplate. Automation engineers bolt the compact metal chassis into confined electrical enclosures—which is critical for high-density machine retrofits—routing single-phase or three-phase power lines straight into the internal rectifier stage.
Operational safety demands verified OEM hardware over undocumented grey-market clones. Deploying this exact servo drive guarantees strict current-loop update intervals and precise velocity tracking across precision mechanics, preventing axis synchronization drift during high-speed production runs.
3.Core Technical Specifications
| Parameter | Value |
|---|---|
| Product Family & Model | Kollmorgen S200 Series / S20660-SRS |
| Input Voltage Rating | 120 / 240 VAC (single or three-phase) |
| Nominal Bus Voltage | 320 VDC |
| Continuous Current Output | 6.0 A RMS |
| Peak Current Output | 18.0 A RMS (up to 3.0 second duration) |
| Continuous Output Power | 2000 W (at 240 VAC 3-phase) |
| Current Loop Bandwidth | Up to 3 kHz max (2 kHz recommended setting) |
| Network Architecture | SynqNet via standard RJ-45 connectors |
| Enclosure Dimensions (H x W x D) | 175.0 mm x 64.0 mm x 131.6 mm |
| Approximate Unit Weight | 1.1 kg (2.43 lbs) |
- Global Compliance & Industry Certifications
Auditors require strict documentation proving that industrial servo hardware satisfies regional electrical safety codes. This amplifier carries crucial international benchmarks, including the CE Mark for European market entry, UL/cUL listing for North American industrial control cabinets, and compliance with low-voltage directives.
A proper UL listing guarantees that internal power switching transistors and bus isolation barriers will contain severe internal shorts, protecting panel operators from electrical shock hazards during live rack checks. Verify specific lot certifications with OEM.
5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine)
Precision drives left unpowered in stockrooms for years face severe risks of electrolytic capacitor dielectric degradation and internal logic board oxidation. Leave the amplifier inside its original factory-sealed anti-static moisture-barrier bag until the exact minute of mechanical panel assembly. Maintain storeroom climate controls with relative humidity strictly below 60 percent and ambient temperatures stable between 10°C and 30°C to safeguard printed circuit traces. If this unit sits on a shelf past three consecutive years, technicians must perform a controlled variable-voltage DC bus pre-charge routine to reform the bulk electrolytic capacitors before applying full line voltage.
- Physical Installation Prerequisites
Mount the drive vertically onto a grounded bare-metal panel backplate inside an IP54 or better rated electrical enclosure, leaving at least 50mm of vertical clearance above and below the housing for unimpeded convective airflow. Secure the protective earth conductor directly to the designated chassis grounding stud using star washers to suppress high-frequency electromagnetic interference originating from fast-switching pulse-width modulation motor cables.
- Buyer’s FAQ (Logistics & Compliance Focus)
- What Harmonized System (HS) tariff code governs international shipments of this servo drive? Static converters and variable-speed drives typically fall under HS code 8504.40, though import clearing agents should verify local customs interpretations.
- Does the drive ship pre-loaded with application-specific motor tuning profiles? The hardware arrives with baseline factory firmware and default parameters, requiring motion engineers to execute parameter configuration via the setup software prior to enabling axis motion.
- How does the Country of Origin (COO) impact international shipping compliance? Official manufacturing origin documentation must match commercial export invoices precisely to prevent customs holds or secondary duty assessments at the border.
- What level of freight transit insurance is recommended for delivery? Full-value commercial cargo insurance paired with shock-impact indicator labels is mandatory to protect sensitive electronic motion controllers during transit.
The Kollmorgen S20360-SRS is an all-digital Kollmorgen CP303250: Power Block Architecture and Thermal Management Kollmorgen SERVOSTAR 406A-C Digital Servo Drive
