Description
1. Unboxing & Physical Snapshot
- Model & Brand: Honeywell (Safety Manager / Experion Infrastructure) — FC-TSHART-1620M (16-Channel HART Analog Input Field Termination Assembly)
- Physical Dimensions: Compact modular industrial DIN-rail/panel-mount termination block featuring multi-pin connector interfaces and heavy-duty screw terminal blocks.
- Estimated Shipping Weight: 1.1 kg (2.43 lbs) packed inside heavy anti-static shielding, moisture-barrier packaging, and custom-molded corrugated cartons.
- What’s in the Box: FC-TSHART-1620M termination assembly unit, factory inspection data tag, terminal block designation markers, and compliance safety insert (note: system-side pre-engineered connection cables are ordered separately).
2. Product Introduction
Terminating field-side instrumentation while supporting transparent HART digital communication protocols in high-integrity safety instrumented systems (SIS) requires robust, fault-tolerant hardware. Operating as an essential component within Honeywell Safety Manager and advanced process control architectures, the FC-TSHART-1620M serves as a 16-channel analog input field termination assembly (FTA) designed to interface field transmitters with system I/O modules (—ensuring secure signal pass-through, loop power distribution, and HART diagnostic data overlay).
Engineered with high-grade galvanic isolation, low-resistance terminal connections, and rugged electronic protection circuitry, the unit maintains signal integrity under harsh industrial noise conditions. Process safety engineers and instrumentation specialists rely on this OEM termination assembly to preserve loop reliability and streamline cabinet wiring across critical oil, gas, and chemical refining facilities.
3. Core Technical Specifications
| Parameter | Value |
| Product Series | Honeywell Safety Manager / Control System Field Terminations |
| Model / Part Number | FC-TSHART-1620M |
| Channel Capacity | 16-channel analog input loop termination |
| Communication Protocol | Transparent HART protocol support for digital diagnostic overlay |
| Mounting Type | Standard industrial DIN-rail or direct panel mounting layout |
| Terminal Type | Heavy-duty screw clamp connections for secure field wire retention |
| Operating Temperature | 0^\circC to +60^\circC (32^\circF to 140^\circF) |
| Storage Temperature | -40^\circC to +85^\circC (-40^\circF to +185^\circF) |
| Enclosure Rating | Open-type modular industrial hardware (housed within grounded cabinets) |
4. Global Compliance & Industry Certifications
Regulatory safety audits and functional safety (IEC 61508) mandates require rigorous compliance documentation for all field termination assemblies connected to safety instrumented functions.
- Certifications: CE Mark, cULus Listed industrial control equipment, CSA certified, and compliant with hazardous location nonincendive ratings where applicable.
- Safety Relevance: The integrated signal conditioning and isolation barriers prevent field-side electrical surges and ground faults from propagating back into core safety processor loops.
- Audit Note: Keep loop wiring diagrams, cabinet inspection sheets, and hardware revision numbers accessible to satisfy local safety lifecycle and insurance audits.
5. Long-Term Storage & Asset Preservation Guide
Spare termination assemblies stored in warehouse stockrooms face terminal oxidation and polymer aging over extended storage cycles (—requiring strict environmental management to protect capital inventory). Preserve your asset by executing these procedures:
- Maintain indoor warehouse climates where ambient storage temperatures stay between -20^\circC and +55^\circC while keeping relative humidity strictly below 80% non-condensing.
- Keep the module permanently sealed inside its original factory anti-static moisture-barrier bag alongside active desiccant packs until the exact panel installation window.
- Inspect screw terminal blocks and connector pins annually for dust accumulation or tarnish, keeping contact points clean and dry.
6. Physical Installation Prerequisites
Proper wire sizing, terminal torque management, and cabinet grounding continuity are mandatory during FTA installation.
- Clearance Space: Ensure unobstructed vertical routing pathways above and below the terminal block assembly to prevent mechanical stress on field wiring harnesses.
- Grounding Requirements: Securely connect panel shield grounding bars and drain wires directly to the cabinet ground bus to ensure effective electromagnetic interference (EMI) shielding.
- Power Isolation: De-energize all field loops and power distribution feeds before connecting or disconnecting field wiring to prevent short circuits or loop disruption.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to this Honeywell termination assembly for international shipments?
A: Industrial control system terminal blocks, interface modules, and connection apparatus typically classify under HS code 8536.90.4000 (Terminal blocks, strips, and similar electrical connection apparatus). Always verify final classifications with your customs broker.
Q: What primary function does the HART capability provide on the FC-TSHART-1620M?
A: It enables transparent bi-directional HART communication, allowing asset management software to poll smart field transmitters for diagnostics and configuration without interrupting safety analog control loops.
Q: What is the Country of Origin (COO) for trade compliance record-keeping?
A: Honeywell automation hardware is manufactured in designated North American or European production facilities, requiring precise country declarations on commercial import paperwork.
Q: Is specialized shock-resistant transit insurance required for international cargo delivery?
A: Yes, because multi-pin connectors and molded terminal housings can fracture under severe drop shocks, full-value freight insurance is strongly recommended.
Honeywell 05701-A-0302 Single-Channel Control Card Honeywell 05704-A-0144 System 57 Quad Control Card Honeywell FC-QPP-0002 – Quad Processor Pack Honeywell CC-PWRR01 – Redundant Power Supply Module
