Description
1. Unboxing & Physical Snapshot
- Model & Brand: Fire-Lite Alarms / Honeywell — MRP200XV31 (MRP-2002 Releasing Fire Alarm Control Panel Main PCB Assembly)
- Physical Dimensions: Standard modular replacement circuit board configured to mount directly inside standard RP-2002/MRP-2002 red steel backboxes.
- Estimated Shipping Weight: 2.0 kg (4.4 lbs) packed in heavy-duty anti-static bubble shielding and reinforced custom corrugated cartons.
- What’s in the Box: MRP200XV31 main logic and power-regulation circuit board, onboard keypad and display interface overlay, mounting standoffs, and factory data sheet insert (note: cabinet backbox, transformer assembly, and standby batteries are sold separately).
2. Product Introduction
Maintaining life-safety infrastructure in mission-critical environments requires reliable replacement circuit boards capable of restoring agent-releasing fire control panels back to full operational compliance without complete system rewiring. Operating as the primary logic and control motherboard for Fire-Lite MRP-2002 and compatible releasing panels, this circuit board processes zone inputs, coordinates countdown timers, and triggers solenoid releasing circuits for preaction, deluge, and clean-agent suppression systems (—which guarantees rapid, error-free suppression actuation during fire emergencies).
Engineered with built-in supervision circuits, programmable event logic, and heavy-duty terminal blocks, the board replaces failed or damaged controllers while retaining existing field wiring. Life-safety technicians and facility managers rely on this exact OEM circuit board assembly to ensure seamless compliance and minimal system downtime.
3. Core Technical Specifications
| Parameter | Value |
| Product Series | Fire-Lite MRP-2002 / Honeywell Releasing Systems |
| Component Type | Main Fire Alarm Control Panel (FACP) Circuit Board Assembly |
| Initiating Device Circuits (IDCs) | 4 conventional programmable zones |
| Releasing Output Circuits | 2 discrete hazard output circuits for solenoids / actuators |
| Notification Appliance Circuits (NACs) | 2 programmable output circuits (regulated 24 VDC) |
| Input Power Requirements | Low-voltage DC rails driven by primary cabinet transformer/power supply |
| Operating Temperature | 0^\circC to +49^\circC (32^\circF to 120^\circF) |
| Storage Temperature | -20^\circC to +70^\circC (-4^\circF to 158^\circF) |
| Enclosure Compatibility | MRP-2002 / RP-2002 standard metal backboxes |
4. Global Compliance & Industry Certifications
Regulatory life-safety audits require strict compliance verification when replacing internal fire control processor boards.
- Certifications: UL Listed (UL 864 9th Edition), FM Approved (Factory Mutual), CSFM Listed, and NFPA compliant.
- Safety Relevance: The UL 864 and FM approvals ensure that zone supervision, power fault detection, and solenoid release pathways meet rigorous life-safety standards, preventing accidental discharges or undetected circuit faults.
- Audit Note: Verify that board revision levels (such as Rev. A or later) match your system’s local authority having jurisdiction (AHJ) submittal and engineering requirements.
5. Long-Term Storage & Asset Preservation Guide
Spare electronic control boards stored in stockrooms face component degradation and electrostatic risks over extended storage durations (—requiring careful environmental management to protect capital inventory). Preserve your investment by executing these procedures:
- Maintain indoor warehouse climates where ambient storage temperatures stay between -10^\circC and +50^\circC while keeping relative humidity strictly below 85% non-condensing.
- Keep the circuit board sealed inside its original factory anti-static moisture-barrier bag alongside active desiccant packs until the exact field replacement window.
- Inspect the multi-pin terminal blocks and surface-mounted fuses annually for dust accumulation or tarnish, brushing surfaces gently with clean, dry compressed air if necessary.
6. Physical Installation Prerequisites
Proper electrostatic discharge (ESD) handling and power isolation are mandatory when swapping internal panel logic boards.
- Power Interlock: Completely disconnect both primary AC power mains and standby backup batteries before touching or installing the circuit board to prevent electrical shock or component frying.
- Grounding Requirements: Always wear an approved ESD wrist strap connected to the cabinet metal grounding stud when handling the bare PCB assembly.
- Cable Verification: Verify that all field wiring plugs and ribbon harnesses align correctly with their respective keyed headers before securing mounting screws.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to this Fire-Lite circuit board for international shipments?
A: Fire alarm control panels and electrical signaling system parts typically classify under HS code 8531.90.9001 (Parts of electric sound or visual signaling apparatus). Always verify final classifications with your customs broker.
Q: Is the MRP200XV31 board compatible with standard MRP-2002 cabinets?
A: Yes, MRP200XV31 is the exact OEM circuit board designation for the Fire-Lite MRP-2002 releasing control panel main logic board.
Q: What is the Country of Origin (COO) for trade compliance record-keeping?
A: This safety hardware is manufactured in designated global electronics production facilities, requiring precise country declarations on commercial import paperwork.
Q: Is specialized transit insurance required for international cargo delivery?
A: Yes, because multi-layer surface-mounted circuit boards and delicate onboard display connectors are sensitive to drop impacts, full-value freight insurance is strongly recommended.
Honeywell 05701-A-0302 Single-Channel Control Card Honeywell 05704-A-0144 System 57 Quad Control Card Honeywell FC-QPP-0002 – Quad Processor Pack Honeywell CC-PWRR01 – Redundant Power Supply Module
