Description
1. Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: Honeywell Sieger Searchpoint Optima Plus (Part Number: 2108B2001N)
- Physical Dimensions: Length: 165mm, Diameter: 73mm (cylindrical housing profile)
- Estimated Shipping Weight: 1.6 kg (boxed with molded static-dissipative foam cushioning)
- What’s in the Box: 1x 2108B2001N infrared gas detector sealed inside factory protective packaging, 316 stainless steel housing assembly, weather protection hood, and OEM safety compliance documentation.
2. Product Introduction (Structure C: Compliance Hook)
Regulatory compliance governs every decision inside high-consequence hydrocarbon processing environments, requiring gas detection hardware certified to strict international explosion-safety thresholds. Operating classified hazardous sectors demands instruments carrying transparent documentation and traceable manufacturing histories to pass independent safety audits and insurance inspections.
The Honeywell 2108B2001N satisfies these rigorous verification protocols through robust optical design, precision 316 stainless steel construction, and internationally recognized hazardous area certifications. (We always inspect the physical laser-etched serial codes against the accompanying Certificate of Conformance during incoming receiving inspections.)
3. Core Technical Specifications
| Parameter | Value |
| Detection Principle | Infrared absorption point gas detection (hydrocarbon gases) |
| Housing Material | Marine-grade 316 stainless steel enclosure |
| Response Time | T50 < 3 seconds, T90 < 4 seconds (for methane) |
| Operating Voltage | 24V DC nominal (18V to 32V DC range) |
| Power Consumption | Maximum 4.5 W under operating load |
| Output Signal | 4 to 20 mA current sink/source (HART communication enabled) |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +70°C |
| Enclosure Protection | IP66 / IP67 weather-proofing and NEMA 4X rating |
4. Global Compliance & Industry Certifications
Auditors demand verifiable documentation confirming that safety instrumentation complies with rigorous electrical and explosion-protection mandates before process plants resume operation.
- Expected Certifications: ATEX, IECEx, UL, CSA, FM, Inmetro, and CE Mark conformity.
- Compliance Significance: UL and ATEX/IECEx listings verify that internal optical elements and flamepaths contain any internal deflagration, preventing spark ignition within explosive gas atmospheres (Class I Div 1 / Zone 1 hazardous classifications). Verify specific lot certifications with OEM documentation before closing out plant safety reviews.
5. Long-Term Storage & Asset Preservation Guide
Warehouse storage destroys unprotected process instruments if humidity and environmental hazards go unmanaged. Keep this asset safe:
- Store the gas detector sealed tightly inside its original factory packaging to block atmospheric moisture and dust accumulation on optical lenses.
- Maintain warehouse relative humidity strictly below 60% to prevent micro-corrosion on the electrical terminal pins and cable entries.
- Lay the unit flat on static-dissipative foam pads to absorb structural building vibrations and protect the precision internal optics from mechanical shock.
6. Physical Installation Prerequisites
Proper mechanical placement guarantees rapid gas cloud detection and prevents localized measurement blind spots inside the process area.
- Mounting Orientation: Position the detector where flammable gas clouds are most likely to accumulate, ensuring unimpeded air flow across the optical aperture.
- Wiring Protocol: Utilize certified explosion-proof cable glands and shielded twisted-pair cabling bonded to the local earth grounding stud to suppress high-frequency electromagnetic interference.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: Which Harmonized System (HS) code applies to international customs clearance for the 2108B2001N?
A: This gas analyzer/detector unit typically clears under HS code 9027.10 (Gas or smoke analysis apparatus), but importers should confirm final classification with their broker according to local rules.
Q: Does this surplus unit come with factory calibration certificates?
A: New surplus hardware ships with standard OEM factory calibration sheets where applicable; safety management systems typically require a fresh bump test and zero/span calibration post-installation.
Q: How does the declared Country of Origin (COO) influence international shipping paperwork?
A: The COO—typically United Kingdom (UK) for this manufacturing line—governs preferential duty rates under international trade agreements, making a verified certificate of origin essential for seamless customs processing.
| Honeywell 05701-A-0302 Single-Channel Control Card |
| Honeywell 05704-A-0144 System 57 Quad Control Card |
| Honeywell FC-QPP-0002 – Quad Processor Pack |
| Honeywell CC-PWRR01 – Redundant Power Supply Module |
