Description
The HIMA F7130A (part number 984713001) is a central processor module designed for the HIMA Planar 4 / H4 and HiQuad safety-instrumented systems, executing safety-related application logic in Safety Integrity Level (SIL 3 / IEC 61508) industrial environments. In field installations of HIMA safety instrumented systems, this module processes fail-safe control programs, manages redundant internal bus communication, and handles diagnostic monitoring for emergency shutdown (ESD) and burner management systems (BMS).
Technical Specifications
| Parameter | Value |
| Manufacturer | HIMA |
| Product ID | 984713001 (F7130A) |
| System Compatibility | HIMA HiQuad (H 41q / H 51q series) |
| Safety Integrity Level | SIL 3 (IEC 61508), Cat. 4 / PL e (EN ISO 13849-1) |
| Processor Architecture | Dual-channel redundant architecture (1oo2d structure) |
| Communication Ports | RS-485 interfaces for system bus and peer-to-peer communication |
| Operating Voltage | 24 V DC (via system backplane) |
| Current Consumption | 1.2 A typical |
| Operating Temperature | 0 to +60 °C |
| Enclosure Protection | IP20 |
| Diagnostics | Integrated self-test, watchdog timer, and system status LEDs |
Availability and Commercial Terms
- Condition: New Original (New Surplus) / Factory Sealed / Refurbished (tested). Specify requirement upon inquiry.
- Lead Time: 1 to 3 business days for stock items; 2 to 4 weeks for factory-sourced inventory.
- Warranty: 12-month standard replacement warranty from date of shipment.
- Pricing Note: Listed price is indicative, not final. Price subject to market conditions; contact us for a firm quote.
Engineering and Migration Notes
The F7130A operates within the HiQuad rack architecture, utilizing parallel processing channels to continuously cross-check execution results and trip safety outputs if a discrepancy occurs.
When replacing or installing an F7130A module, verify that the system firmware version loaded on the module matches the configuration built in the ELOP II programming environment. Mismatched firmware or configuration checksum errors will prevent the safety system from transitioning from STOP to RUN mode. Always perform a complete offline validation of the safety project before hot-swapping or commissioning replacement hardware in a live ESD loop.
Frequently Asked Questions
Does the F7130A support hot-swapping?
Yes, the HiQuad system architecture permits hot-swapping of redundant processor modules, provided the system is operating in a non-tripped state and local plant safety procedures allow online module replacement.
What software is used to program and configure this module?
The module is programmed and diagnosed using HIMA ELOP II (Engineering and LOgic Programming) software via serial or network communication interfaces.
What safety certifications apply to this unit?
The F7130A is certified for use in safety-instrumented functions up to SIL 3 according to IEC 61508 and related process industry standards (verify with OEM datasheet for specific certificate numbers and revisions).
