Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: GE Fanuc / Emerson (Part Number: IC698PSA100D / PACSystems RX7i Power Supply Series)
- Physical Dimensions: Standard PACSystems RX7i rack-mount module profile (Approximately 170 mm × 140 mm × 110 mm)
- Estimated Shipping Weight: 2.10 kg (Including protective anti-static packaging and heavy export carton)
- What’s in the Box: IC698PSA100D power supply module, pluggable AC/DC terminal connector blocks, factory test inspection report, and safety compliance insert.
- 2.Product Introduction (Randomized Structural Hook) Operating inside heavy industrial control enclosures and continuous process plant backplanes, this high-capacity power conditioning hardware encounters aggressive electrical noise, line surges, and chronic cabinet vibration. The internal switch-mode circuitry demands robust galvanic isolation and tight voltage regulation to supply stable, filtered DC power to high-performance RX7i CPU and I/O modules without introducing ripple or transmitting transient noise back into the main plant bus.
Engineered specifically for the GE Fanuc PACSystems RX7i controller ecosystem, the module slides securely into designated VME-style card racks where absolute power reliability is mandatory for continuous automation loops. Every internal semiconductor switch and transformer winding is built to sustain round-the-clock operation in severe utility environments.
3.Core Technical Specifications | Parameter | Value | | :— | :— |
| Manufacturer / Family | GE Fanuc / Emerson / PACSystems RX7i Series |
| Input Voltage Range | Standard AC/DC Universal Supply (Optimized for industrial rack distribution) |
| Output Power / Rails | Multi-output regulated DC bus (+5V, +12V, -12V backplane power distribution) |
| Operating Temperature Range | 0°C to +60°C |
| Enclosure Protection Class | IP20 (Requires certified industrial control cabinet installation) |
| Net Weight | 1.850 kg |
- Global Compliance & Industry Certifications Plant safety and automation auditors will immediately reject any uncertified power supply unit integrated into critical PLC backplanes. This hardware tier aligns with stringent international industrial standards.
- Expected Certifications: CE Mark, UL/cUL Listed, CSA, and ISO 9001 manufacturing traceability.
- Compliance Significance: The UL and CE designations confirm that internal low-voltage insulation barriers, short-circuit protection paths, and transient suppression circuits satisfy rigorous safety standards, mitigating electrical flashover hazards during active control operations. (Verify specific lot certifications with OEM).
- 5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine) Critical PLC power supplies kept in reserve inventory require rigorous environmental controls to prevent electrolytic capacitor dielectric degradation and terminal corrosion prior to cabinet installation.
- Maintain a climate-controlled storage facility where ambient relative humidity stays strictly below 60 percent, preventing moisture accumulation from oxidizing terminal block screws and internal bus connections.
- Keep the module permanently sealed inside its original anti-static (ESD) shielding bag and moisture-barrier packaging to protect sensitive internal switching components from electrostatic discharge.
- If storage exceeds a three-year cycle, have an authorized electrical technician inspect all terminal clamp screws and check electrolytic capacitors for physical wear or leakage before field staging.
- 6.Physical Installation Prerequisites PACSystems RX7i rack layout requires strict adherence to manufacturer spacing specifications to maintain proper thermal convection and electrical clearance.
- Leave at least 50mm of unobstructed vertical clearance above and below the rack assembly to facilitate natural air convection across internal heatsinks and ventilation slots.
- Mount securely into its designated power slot on the RX7i backplane, ensuring the front retaining screws are tightened fully to establish a low-impedance ground bond directly to the cabinet ground bus.
- 7.Buyer’s FAQ (Logistics & Compliance Focus)
- Q: What Harmonized System (HS) code applies to international shipments of this PLC power supply module?
- A: Industrial power supplies, static converters, and programmable logic controller parts typically fall under HS code 8504.40 or 8538.90. Verify exact classifications with your customs broker.
- Q: Does this hardware arrive pre-configured with output voltage parameters?
- A: Replacement inventory ships with baseline factory output settings; input power wiring and terminal connections must be verified against system electrical specifications during commissioning.
- Q: How does the Country of Origin (COO) impact preferential import tariffs?
- A: Manufacturing origin typically traces to the United States (US) or authorized global GE/Emerson manufacturing facilities, which influences preferential trade documentation and duty calculations.
- Q: Is specialized transit insurance mandatory for freight forwarding?
- A: Yes, given the high replacement value and critical nature of PACSystems RX7i hardware, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.
- A: Yes, given the high replacement value and critical nature of PACSystems RX7i hardware, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.
