Description
1. Unboxing & Physical Snapshot
- Model & Brand: General Electric (GE / Mark VIe Series) — IS200AEPAH1BHC (Analog Extension Processor / Control PCB Assembly)
- Physical Dimensions: Standard modular printed circuit board format designed for secure mounting within GE Mark VIe turbine control racks and enclosures.
- Estimated Shipping Weight: 0.8 kg (1.76 lbs) packed inside heavy multi-layer anti-static shielding bags and reinforced structural foam cartons.
- What’s in the Box: IS200AEPAH1BHC circuit board assembly, factory data tracking tag, and ESD warning documentation insert (note: backplane connectors and rack assemblies are ordered separately).
2. Product Introduction
Executing complex turbine control strategies and high-speed data acquisition across power generation plants requires specialized, high-reliability processing hardware. Operating as an integral component within the GE Mark VI and Mark VIe Distributed Control System (DCS) architecture, the IS200AEPAH1BHC printed circuit board handles high-speed communication, signal processing, and control logic execution (—ensuring continuous synchronization between field instrumentation and the core controller).
Engineered with advanced Ethernet connectivity, hardware-based packet handling, and rigorous diagnostic self-monitoring, the module maintains robust performance under extreme electrical noise and thermal stress. Plant reliability engineers and control system specialists rely on this OEM processor card to prevent spurious plant trips and maintain high availability across heavy-duty gas and steam turbine assets.
3. Core Technical Specifications
| Parameter | Value |
| Product Series | GE Mark VI / Mark VIe Distributed Control System (DCS) |
| Board Type | Processor / Control Printed Circuit Board Assembly |
| Communication Interface | High-speed Ethernet ports supporting 10/100/1000BASE-T connectivity |
| System Architecture | Modular plug-in design for rack mounting within control cabinets |
| Diagnostic Features | On-board health monitoring LEDs and automated self-test loops |
| Operating Temperature | 0^\circC to +65^\circC (32^\circF to 149^\circF) |
| Storage Temperature | -40^\circC to +85^\circC (-40^\circF to +185^\circF) |
| Enclosure Rating | Open-type modular PCB (housed within a grounded industrial control panel) |
4. Global Compliance & Industry Certifications
Regulatory safety and quality audits demand strict compliance documentation for any processor card installed within critical power generation infrastructure.
- Certifications: CE Mark, UL/cUL Listed industrial control equipment, IEC standards compliance, and ISO 9001 manufacturing quality standards.
- Safety Relevance: The strict electromagnetic compatibility (EMC) and optical isolation barriers ensure that high-voltage switching transients from plant switchyards or heavy motor drives cannot corrupt processor logic or communication data paths.
- Audit Note: Keep hardware revision identifiers, firmware logs, and traceability documents accessible to satisfy local utility compliance mandates and insurance inspections.
5. Long-Term Storage & Asset Preservation Guide
Spare electronic control boards stored in warehouse stockrooms face electrostatic discharge risks and surface component aging over extended storage cycles (—requiring careful environmental management to protect capital inventory). Preserve your asset by executing these procedures:
- Maintain indoor warehouse climates where ambient storage temperatures stay between -20^\circC and +55^\circC while keeping relative humidity strictly below 80% non-condensing.
- Keep the module permanently sealed inside its original factory anti-static moisture-barrier bag alongside active desiccant packs until the exact panel replacement window.
- Inspect edge connectors and surface components annually for dust accumulation or tarnish, avoiding chemical cleaners and using clean, dry compressed air only if necessary.
6. Physical Installation Prerequisites
Proper slot assignment, static control precautions, and secure backplane alignment are mandatory when inserting replacement processor boards.
- Clearance Space: Ensure unobstructed vertical airflow paths above and below the control rack to permit effective thermal dissipation across surface-mounted components.
- Grounding Requirements: Always wear an approved ESD wrist strap connected directly to the cabinet grounding stud before handling or sliding the board into its subrack slot.
- Bus Alignment: Guide the card smoothly along internal chassis tracks, ensuring backplane connector pins engage evenly without forcing or bending.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to this GE Mark VIe board for international shipments?
A: Industrial control system circuit boards and processor modules typically classify under HS code 8538.90.8180 (Parts suitable for use solely or principally with control apparatus). Always verify final classifications with your customs broker.
Q: What system platform is the IS200AEPAH1BHC designed to operate within?
A: It is engineered specifically for the GE Mark VI and Mark VIe turbine control and industrial automation ecosystem.
Q: What is the Country of Origin (COO) for trade compliance record-keeping?
A: GE automation hardware is manufactured in designated United States or European production facilities, requiring precise country declarations on commercial import paperwork.
Q: Is specialized transit insurance required for international cargo delivery?
A: Yes, because multi-layer surface-mounted circuit boards and precision connector pins are sensitive to drop impacts and vibration shock, full-value freight insurance is strongly recommended.
