Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: General Electric (GE) / Mark VI Turbine Control Series (Part Number: IS200TBAIH1CDC)
- Physical Dimensions: Standard Mark VI terminal board profile (Approximately 230 mm × 150 mm × 40 mm)
- Estimated Shipping Weight: 1.15 kg (Including multi-layer protective anti-static packaging and export carton)
- What’s in the Box: IS200TBAIH1CDC terminal board, barrier terminal block covers, factory test report, and safety compliance insert.
- 2.Product Introduction (Randomized Structural Hook) Operating inside heavy-duty gas and steam turbine control cabinets, this critical analog input terminal board encounters severe electrical noise, high common-mode voltages, and chronic enclosure vibration. The high-density signal conditioning and terminal routing architecture require strict optical and galvanic isolation to manage sensitive sensor inputs accurately without introducing signal drift or ground loop interference into the primary controller.
Engineered specifically for the GE Mark VI Distributed Control System (DCS) platform, the assembly mounts securely onto standard cabinet rails or panel standoffs where reliable signal termination and high-availability data acquisition are mandatory. Every screw terminal and surface-mounted trace is built to sustain round-the-clock operation in severe power generation environments.
3.Core Technical Specifications | Parameter | Value | | :— | :— |
- | Manufacturer / Family | General Electric (GE) / Mark VI Turbine Control Series (IS200TBAIH1CDC) |
- | Module Type | Analog Input Terminal Board (TBAH) |
- | Signal Inputs | Supports multiple analog current/voltage sensor channels |
- | Operating Temperature Range | -30°C to +65°C |
- | Enclosure Protection Class | IP20 (Requires certified turbine control cabinet installation) |
- | Net Weight | 0.850 kg |
- Global Compliance & Industry Certifications Plant safety auditors and turbine control engineers will immediately reject any uncertified terminal board integrated into critical power generation loops. This hardware tier aligns with stringent international benchmarks.
- Expected Certifications: CE Mark, UL/cUL Listed, ATEX Zone 2 options, and RoHS environmental compliance.
- Compliance Significance: The UL and CE designations confirm that internal low-voltage creepage distances, clearance barriers, and dielectric protection satisfy rigorous safety standards, mitigating electrical short-circuit and spark risks during active plant operation. (Verify specific lot certifications with OEM).
- 11.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine) Critical turbine control spares kept in warehouse reserve require strict environmental oversight to prevent silent degradation of terminal blocks and electronic components prior to active commissioning.
- Maintain a climate-controlled storage facility where ambient relative humidity stays strictly below 60 percent, preventing moisture accumulation from oxidizing screw clamp terminals and solder joints.
- Keep the unit completely sealed inside its original anti-static (ESD) shielding bag and moisture-barrier packaging to protect sensitive semiconductor devices from electrostatic discharge.
- If storage exceeds a three-year cycle, have an instrument technician inspect all terminal block clamp screws for corrosion and verify trace continuity before field staging.
- 12.Physical Installation Prerequisites Control cabinet layout requires strict adherence to manufacturer wiring practices and shielding guidelines to maintain signal integrity.
- Ensure all cabinet power is completely locked out and discharged before installing or servicing the IS200TBAIH1CDC terminal board.
- Mount securely onto designated cabinet standoffs, ensuring all ground connections and shield bars are properly bonded to establish a low-impedance ground return.
- 13.Buyer’s FAQ (Logistics & Compliance Focus)
- Q: What Harmonized System (HS) code applies to international shipments of this GE terminal board?
- A: Industrial control terminal boards, PLC interface parts, and electrical apparatus components typically fall under HS code 8538.90. Verify exact classifications with your customs broker.
- Q: Does this hardware arrive pre-configured with jumper or termination settings?
- A: Replacement inventory ships as baseline hardware; specific input scaling, shielding configurations, and I/O assignments must be verified against system drawings during commissioning.
- Q: How does the Country of Origin (COO) impact preferential import tariffs?
- A: Manufacturing origin typically traces to the United States (US) or authorized global GE Power conversion production facilities, which influences preferential trade documentation and duty calculations.
- Q: Is specialized transit insurance mandatory for freight forwarding?
- A: Yes, given the high replacement value and critical safety role of Mark VI turbine control cards, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.
- A: Yes, given the high replacement value and critical safety role of Mark VI turbine control cards, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.
