Description
1. Unboxing & Physical Snapshot
- Model & Brand: Bently Nevada (Baker Hughes) 330130-080-01-CN (3300 XL Standard Extension Cable)
- Physical Dimensions: Cable Length: 8.0 meters (26.2 feet); ClickLoc coaxial connectors equipped with integrated stainless steel armor
- Estimated Shipping Weight: 0.85 kg (coiled securely within custom multi-layer anti-static packaging)
- What’s in the Box:
- 1 x 8.0-Meter 3300 XL Proximity Extension Cable (Armored)
- Factory-attached connector protectors with integrated sealing boots
- Note: 3300 XL probe and Proximitor sensor units are ordered independently.
2. Product Introduction
Structure A (Environmental hook): Operating continuously within high-vibration compressor housings, heavy rotating machinery skids, and harsh industrial atmospheres demands specialized cabling capable of resisting physical abrasion and crushing loads. This 8-meter extension cable links the 8mm proximity probe to the Proximitor sensor, maintaining absolute signal fidelity across long distances without introducing phase distortion.
Regulatory compliance auditors and machinery protection specialists strictly verify part number extensions and regional certification suffixes during safety reviews. Deploying this exact OEM configuration ensures compliance with API 670 monitoring requirements while protecting turbomachinery assets from unmonitored mechanical failure.
3. Core Technical Specifications
| Parameter | Value |
| System Family | Bently Nevada 3300 XL Proximity Transducer System |
| Component Type | Standard Coaxial Extension Cable |
| Cable Length Option | 8.0 meters (26.2 feet) (-080 option) |
| Armor / Protection Option | FEP insulated cable with flexible stainless steel armor (-01 option) |
| Characteristic Impedance | 75 ohms |
| Agency Approval Suffix | -CN (NEPSI, ATEX, and IECEx hazardous area country-specific approvals) |
| Operating Temperature | -51°C to +177°C (-60°F to +350°F) |
4. Global Compliance & Industry Certifications
- Expected Certifications: CE Mark, ATEX/IECEx, CSA/NRTL, and NEPSI (-CN specific regional hazardous location compliance).
- Safety Relevance: The regional hazardous area approvals (-CN option) certify that the low-energy circuit loop remains intrinsically safe, preventing electrical arcs from igniting volatile gases or dust in classified plant zones.
- Audit Warning: Verify specific lot compliance tags against active facility safety documentation to maintain audit trail continuity during insurance or environmental inspections.
5. Long-Term Storage & Asset Preservation Guide
Coaxial instrument wiring stored in industrial warehouses is vulnerable to dielectric breakdown, jacket cracking, and connector thread contamination if environmental parameters are ignored.
- Moisture and Climate Control: Maintain storage room relative humidity below 60% to prevent micro-oxidation on the gold-plated center pins of the ClickLoc connectors.
- Coaxial Bend Radius Control: Store the cable in a wide, natural coil configuration exceeding a 50mm bend radius; tight pinching permanently deforms the internal 75-ohm impedance profile.
- Protective Cap Integrity: Leave the factory connector protectors screwed tightly over both ends until the exact moment of physical installation to block airborne particulates and workshop grit.
6. Physical Installation Prerequisites
- Routing Separation: Keep the armored cable run physically isolated from high-voltage motor feeds, variable frequency drives (VFDs), and heavy power conduits to eliminate electromagnetic interference (EMI).
- Connector Seating: Hand-tighten the ClickLoc coaxial connectors until the integrated internal ratchet mechanism clicks, confirming positive mechanical engagement and low electrical resistance.
- Mechanical Strain Relief: Fasten the armored line securely using insulated industrial clamps at regular intervals to prevent destructive high-frequency fatigue caused by machine vibration.
7. Buyer’s FAQ (Logistics & Compliance Focus)
- What Harmonized System (HS) Tariff Code applies to global customs clearance?
Industrial electrical cords and insulated conductor assemblies fitted with connectors typically route under customs tariff code 8544.42.
- What does the “-CN” suffix designate regarding compliance?
The “-CN” option specifies agency approvals tailored for specific regional requirements, including hazardous area documentation (such as NEPSI standards alongside ATEX/IECEx frameworks).
- How should high-value transit insurance be handled during international shipping?
Always specify full-value freight insurance paired with a crush-resistant outer carton to protect the precision coaxial connector ends from heavy impact trauma.
- What is the verified Country of Origin (COO) for cross-border import audits?
United States (cross-reference specific barcode tracking tags and factory date codes against the accompanying Certificate of Conformance).
