Bentley Nevada 330130-080-00-CN | 3300 NSv Proximity Probe Factory Sealed

Description

1. Unboxing & Physical Snapshot

• Model & Brand: Bently Nevada (Baker Hughes), 330130-080-00-CN (3300 NSv Non-Standard Probe)
• Physical Dimensions: 8mm probe tip diameter, 0.5-meter integral cable length with ClickLoc connector
• Estimated Shipping Weight: 0.3 kg (Boxed with custom antistatic cushioning; Net unit weight: ~0.15 kg)
• What’s in the Box: Bently Nevada 330130 NSv proximity probe assembly, protective thread caps, factory calibration data sheet, and regulatory compliance slip (extension cables and 3300 NSv proximity proximitors sold separately).

2. Product Introduction

Rotating machinery diagnostics require high-precision non-contacting vibration transducers capable of measuring radial shaft vibration and axial position in restricted physical spaces. The 330130-080-00-CN belongs to Bently Nevada’s 3300 NSv (Non-Standard version) series, engineered specifically for measurements on small-target applications or cramped mechanical areas where standard 8mm or 11mm probes cannot provide linear response fields.

Heavy industrial turbines, compressors, and gearboxes subject internal monitoring instrumentation to extreme mechanical oil immersion, high rotational speeds, and intense vibration. Machinery protection engineers rely on this specific NSv transducer configuration to deliver repeatable, sub-micron gap measurements straight to condition monitoring racks without mechanical wear points.

3. Core Technical Specifications

4. Global Compliance & Industry Certifications

Auditors inspecting critical machinery protection systems and API 670 compliant safety loops demand strict verification of hazardous location ratings and electrical isolation certificates.

• Expected Compliance Standards: CE Mark, API 670 Compliance, ATEX/IECEx Zone 0/1, and CSA/FM Intrinsically Safe certifications.
• Safety Significance: The rigorous hazardous area design guarantees that energy levels delivered through the coaxial cable cannot spark explosive gas or vapor mixtures within classified compressor and turbine enclosures, protecting plant assets and personnel.
• Verify specific lot certifications and hazardous area control drawings with Bently Nevada or your regional safety compliance officer prior to mechanical installation.

5. Long-Term Storage & Asset Preservation Guide

Precision eddy current probes kept in warehouse stock inventories remain vulnerable to coaxial cable jacket hardening, connector pin contamination, and piezoelectric crystal micro-fractures if storage protocols are bypassed.

Keep the probe assembly sealed inside its original protective anti-static and moisture-barrier packaging to shield the miniature ClickLoc connector from airborne dust and industrial sulfur. Maintain stockroom climate parameters strictly below 60% relative humidity and prevent sharp bends along the integral coaxial cable to protect the internal conductor geometry. Inspect the probe tip thread pitch and connector integrity annually before staging the unit for machine thread-in.

6. Physical Installation Prerequisites

Accurate radial vibration and axial position measurements require precise mechanical alignment and rigid mounting brackets. Ensure the probe mounting hole is tapped cleanly to match the exact thread profile, and use proper locking nuts to prevent operational loosening under high-amplitude machine casing vibration. Maintain correct electrical clearance distances between adjacent probes to prevent cross-talk interference between high-frequency oscillator fields.

7. Buyer’s FAQ

• What is the proper Harmonized System (HS) tariff code for international shipments of this proximity probe?
  • Industrial vibration sensors and electrical measuring instruments generally fall under HS Code 9031.80 (Measuring or checking instruments, appliances and machines). Confirm exact bindings with your customs broker.
• Is this probe compatible with standard Bently Nevada 3300 XL proximitor sensors?
  • No, the NSv series requires a dedicated 3300 NSv proximitor sensor calibrated specifically to match the unique electrical characteristics and linear range of the NSv probe tip.
• What logistics factors apply regarding the Country of Origin (COO)?
  • Manufacturing origins for Bently Nevada vibration hardware typically trace to the United States or authorized global production facilities; inspect the exterior shipping box label for exact traceability records.
• What packaging precautions are mandatory for freight transport?
  • Ship the unit inside a double-walled corrugated carton utilizing high-density foam inserts to cushion the delicate threaded probe body and protect the fragile coaxial connector from impact damage during transit.
    

    Bently Nevada 3500/05-01-03-02-00-01 Machinery Protection System Rack

    Bently Nevada 330106-05-30-10-02-00 8mm Proximity Probe

    Bently Nevada 9200-01-01-10-00 Seismoprobe Velocity Transducer

    Bently Nevada 177230-01-01-05 – Vibration Monitoring Sensor