Description
Unboxing & Hardware Overview
- Manufacturer & Architecture: ABB / Hartmann & Braun (Advance Optima Process Analytics Platform)
- Part Number / Model: 24411-0-110000011111 (Core Base Module Family: 24411 Electronics Module / Processing Unit)
- Product Type: Central Processing / Electronic Control Module for Gas Analyzer Systems
- Physical Dimensions: Standard modular slide-in rack card enclosure designed for direct slot integration into Advance Optima rack housings (such as AO2000 series systems)
- Estimated Shipping Weight: ~4.5 lbs (2.0 kg) enclosed in heavy industrial anti-static ESD shielding and structural protective foam cushioning
- Primary Condition Status: Factory New / New Surplus / Refurbished Tested options available (verify specific configuration and firmware code string with provider prior to dispatch)
Product Introduction
The ABB / Hartmann & Braun 24411 series electronic module is a core processing component engineered for the Advance Optima modular gas analysis system. Functioning as the central electronic brain or communication/processing node, it handles data acquisition, internal module communication, input/output management, and signal processing for continuous emission monitoring (CEM) and industrial process gas analysis.
The alphanumeric part code structure (such as your specific string ending in 11111) defines the factory-configured options, including power supply variants, digital/analog communication board expansions, software functional packages, and specific analyzer housing integration parameters.
Core Technical Specifications
| Parameter | Value |
| Product Family | Advance Optima 24411 Electronic Module Series |
| System Compatibility | ABB / Hartmann & Braun Advance Optima AO2000 / EM analyzer housings |
| Module Function | Central Processor / Control & I/O Electronic Card Assembly |
| Communication Options | Configurable via internal slot options (Modbus, Profibus, Ethernet, or standard serial links depending on the string) |
| Power Supply Requirements | Standard internal system rack power distribution (typically low-voltage DC derived from central rack power units) |
| Operating Temperature | +5°C to +50°C (41°F to 122°F) internal cabinet range |
| Storage Temperature | -25°C to +65°C (-13°F to 149°F) |
| Relative Humidity | Max. 75% annual average, non-condensing |
Compliance & Standards Alignment
- Manufactured in accordance with stringent industrial electrical safety directives, CE requirements, and EMC standards for analytical measuring equipment.
- Designed for deployment in industrial analytical shelters, chemical plants, and environmental monitoring stations.
Technical Note: Advance Optima electronic modules rely on specific configuration strings (the trailing digits in part numbers like
24411-0-...) to define hardware options and firmware profiles. Ensure your replacement module matches your analyzer’s exact configuration code to prevent software or communication mismatches with connected detector modules (e.g., Uras, Limas, or Magnos modules).
Storage & Asset Preservation Guidelines
- Store the electronic module inside its original antistatic ESD shielding bag to protect sensitive microprocessors, flash storage, and delicate logic traces from electrostatic discharge.
- Keep warehouse storage environments strictly dry, temperature-controlled, and below 60% relative humidity.
- Avoid mechanical shocks, dropping, or placing heavy objects on the unit to protect board-mounted connectors and internal components.
Physical Installation Prerequisites
- Ensure that the Advance Optima analyzer rack power is completely turned off and locked out (LOTO) prior to sliding the electronic module in or out of the chassis.
- Check module guide rails and rear plug-in multi-pin connectors for bent pins or contamination before inserting the board.
- Secure any front-panel retention screws or locking latches firmly to ensure proper electrical backplane seating and chassis ground continuity.
Buyer’s FAQ & Logistics
Q: What Harmonized System (HS) code applies to this ABB gas analyzer module?
A: Industrial process control electronics, parts for gas analyzers, and electronic monitoring hardware typically classify under HS code 9027.10 (Gas or smoke analysis apparatus) or 8538.90. Confirm final parameters with your customs broker.
Q: Are these modules interchangeable if the long suffix string differs slightly?
A: Minor variations in the long configuration code string can indicate different I/O equipment configurations, firmware profiles, or communication card options. Always match the exact part number or consult an ABB analytical specialist before swapping cards across critical analyzer loops.
Q: Is the listed online price final for procurement?
A: Note: Price is subject to market availability, software revision level, and unit condition (New Surplus vs. Refurbished); contact our technical sales desk for a formal, time-sensitive quotation.
