Description
Meta Description
Sourcing genuine ABB DO810 (3BSE008510R0001) 16-channel 24V DC digital transistor output modules. View S800 I/O technical specs, circuit protections, and inventory availability.
Product Overview
Maintaining low-latency, rapid-cycling signaling loops for pilot lights, solid-state relays, and electronic actuator controls requires high-density semiconductor switching cards. The ABB DO810 (3BSE008510R0001) is a 16-channel Digital Output Module engineered for the modular S800 I/O system. Operating on a nominal 24 V DC loop, this module utilizes solid-state transistor switching to achieve rapid response times and infinite cyclic endurance under automated PLC instruction. We supply this automation hardware as New Original (New Surplus) inside its factory sealed box, paired with a full 12-month commercial replacement warranty.
Technical Specifications
- Parameter: Value
- Brand: ABB
- Model Number: DO810
- Global Product ID: 3BSE008510R0001 (Directly cross-matches base model 3BSE008510R1)
- System Line: S800 I/O Platform
- Output Configuration: Source Type Transistor (Solid-State Short-Circuit Protected)
- Number of Channels: 16 channels, split into two isolated groups of 8
- Nominal Operational Voltage: 24 V DC (Absolute operating window 19.2 V to 30 V DC)
- Continuous Output Current: 0.5 A maximum per channel
- Net Weight: 0.20 kg
- Compatible Mounting Bases: TU810, TU812, TU814, TU830 Module Termination Units (MTUs)
Scenario-Based Field Analysis
When deploying high-density transistor outputs in dense industrial panels, thermal management and wire routing are critical factors. In field deployments of remote S800 I/O nests, we notice that if the external 24 V DC field distribution bus suffers a voltage dip or inductive surge, the internal short-circuit monitors on the DO810 will auto-trip channels to prevent silicon blowout. When dropping in this replacement module, verify that your field loads do not pull inductive inrush currents over 0.5 A. If switching high-draw external solenoid valves, isolate them using independent interposing relay blocks to preserve the solid-state junctions of the DO810 from localized thermal strain over time.
Strengths & Limitations
On the positive side, the transistor-based design provides solid-state switching longevity, making it ideal for fast, repetitive industrial tasks that would rapidly degrade a mechanical relay card. However, current constraints are rigid. The absolute current ceiling is 0.5 A per channel. If an asset maintenance group attempts to drive high-wattage signaling horns or large interposing coils directly through this card without an interposing circuit, the module will instantly flag an over-temperature or over-current state and latch off the channel group for circuit protection.
Stocking & Purchase Advice
- Not recommended for: Directly switching heavy 110 V/230 V AC grid signals or loads requiring absolute air-gap galvanic mechanical insulation (use the DO820 relay variant instead).
- For active S800 I/O nodes: Treat this card as a high-density utility block. Maintain 1–2 units in your on-site physical spares inventory. Because a localized external circuit fault can knock out an internal channel transistor, keeping a factory sealed replacement on hand ensures you can restore 16 process lines with a single, fast hot-swap step.
- Vendor tracking: Protect your operations from long distributor factory build cycles by partnering with suppliers who maintain active, physically verified warehouse inventory of legacy S800 components.
Quick Conclusions
- Offers 16 short-circuit protected 24 V DC transistor source outputs.
- Designed for high-speed, high-cycle automation networks.
- Shipped as premium factory sealed new surplus with a 1-year product warranty.
- Connects directly to standard S800 MTU base blocks for rapid installation.
FAQ
- What is the structural link between code DO810 and the part designation 3BSE008510R0001?DO810 represents the mechanical configuration, channel arrangement, and voltage type profile of the electronic assembly. The 3BSE008510R0001 number (often clipped to 3BSE008510R1) is the manufacturer’s global product catalog code used for enterprise procurement and parts tracing.
- Can this specific solid-state card be extracted while the PLC rack is energized?Yes. The S800 I/O platform supports Hot-Swap capability (Removal and Insertion Under Power), provided that field voltage rails are managed safely and local automation protocols allow hot-swapping.
- Are the output channels on this module individually isolated from each other?No. The 16 channels are configured in a common-source topology split into two isolated groups of 8 channels each, allowing common field power distribution across each group.
