Description
1. Unboxing & Physical Snapshot
- Model & Brand: Woodward — WIC5417-028 (Catalog No. 5417-028)
- Physical Dimensions: Standard factory harness length of approximately 1.5 meters (5 feet) with ruggedized multi-pin connector hoods.
- Estimated Shipping Weight: 0.5 kg (1.1 lbs) packaged inside multi-layer moisture-barrier envelopes.
- What’s in the Box: WIC5417-028 signal cable assembly, factory inspection tag, and protective pin cover caps (note: termination boards and rack backplanes are sold separately).
2. Product Introduction
Complex machinery environments require robust physical interconnects to maintain signal integrity across high-vibration power generation skids. Bridging the gap between internal controller modules and external termination panels, this precision harness routes critical analog and digital data streams securely through noisy industrial cabinets (—which is essential for keeping gas and steam turbines operating without false trips).
Constructed with high-grade shielding, the harness minimizes electromagnetic interference (EMI) originating from heavy-duty variable frequency drives and high-voltage excitation systems. Plant maintenance technicians rely on this exact OEM cable assembly to preserve clean low-level sensor signals across Woodward control architectures.
3. Core Technical Specifications
| Parameter | Value |
| System Compatibility | Woodward MicroNet and NetCon digital control systems |
| Cable Type | Multi-conductor shielded I/O signal harness |
| Standard Length | 1.5 meters (5 feet nominal) |
| Jacket Material | Oil-resistant fluoropolymer composite outer sheath |
| Shielding Construction | 100% foil wrap plus tinned-copper braided outer shield |
| Connector Interface | High-density industrial plug connectors with thumbscrews |
| Operating Temperature | -20^\circC to +70^\circC (-4^\circF to +158^\circF) |
| Storage Temperature | -40^\circC to +85^\circC |
4. Global Compliance & Industry Certifications
Regulatory audits demand complete traceability and material compliance for all control system hardware components.
- Certifications: CE Mark, RoHS environmental directives, and UL-recognized component standards.
- Safety Relevance: The CE and RoHS material ratings ensure that the cable insulation contains no restricted toxic heavy metals and withstands industrial thermal stress without degrading internal electrical isolation barriers.
- Audit Note: Verify specific lot compliance tags against regional electrical code standards before final system handover.
5. Long-Term Storage & Asset Preservation Guide
Spare cables held in warehouse inventory can suffer from outer jacket degradation or pin corrosion if storage protocols are overlooked (—which requires careful environmental management). Protect your spare asset inventory by adhering to these guidelines:
- Store the harness coiled loosely with a large radius inside a climate-controlled room where ambient temperatures remain between -10^\circC and +40^\circC and relative humidity stays strictly below 60%.
- Keep the cable sealed inside its original anti-static moisture-barrier bag with active desiccant packets until the exact maintenance outage window.
- Inspect the connector pins annually for tarnish or oxidation, cleaning contacts lightly with electronic-grade contact cleaner if necessary.
6. Physical Installation Prerequisites
Proper mechanical routing prevents undue strain on connector pins and protects against induced electrical noise.
- Clearance Space: Ensure a minimum bending radius of 120 mm along the cable raceway to avoid micro-fracturing internal conductors under mechanical tension.
- Grounding Requirements: Fasten the integrated shield drain wires directly to the cabinet ground stud using low-impedance hardware to maintain continuous high-frequency noise rejection.
- Strain Relief: Secure the harness firmly to structural panel brackets near both ends using insulated clamps to isolate connector pins from cabinet vibration.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to this Woodward cable assembly for global shipping?
A: Industrial control cables and insulated wire harnesses typically classify under HS code 8544.42.9090 (Insulated electric conductors: Other electric conductors, for a voltage not exceeding 1,000 V, fitted with connectors). Always verify with your broker.
Q: Does this cable assembly require any pre-installation configuration or firmware checks?
A: No. As a passive wiring harness, it contains no active electronic components, microprocessors, or programmable firmware layers.
Q: What is the Country of Origin (COO) for trade compliance documentation?
A: This product is manufactured in the United States, requiring correct commercial declaration on import invoices to satisfy regional trade regulations.
Q: Is specialized transit insurance required for international cargo delivery?
A: Yes, because heavy connector pins can bend or deform under severe impact drops, comprehensive transit insurance is recommended.
