Description
1. Unboxing & Physical Snapshot
- Model & Brand: Siemens SIMATIC NET (SCALANCE X116 Unmanaged Industrial Ethernet Switch), Part Number 6GK5116-0BA00-2AA3.
- Physical Dimensions: Compact IP30 DIN-rail mount metal housing profile (approx. 100 mm x 111 mm x 79 mm).
- Estimated Shipping Weight: 0.65 kg (Including protective packaging, removable screw terminal blocks, and documentation insert).
- What’s in the Box: SCALANCE X116 switch unit featuring 16 RJ45 10/100 Mbps ports, diagnostic LED status display (Power, Link Status, Data Traffic), redundant power supply terminal block, and factory compliance certificates.
2. Product Introduction
Engineered for rugged industrial plant floor environments, this unmanaged switch provides deterministic, plug-and-play Ethernet connectivity for automation devices, PLCs, and operator interfaces.
Mounted directly inside control panels, the hardware distributes industrial Ethernet communications without requiring configuration or software setup. (Plant networking and automation technicians rely on this robust switch tier to expand machine-level Ethernet topologies with high resistance to electromagnetic interference.)
3. Core Technical Specifications
| Parameter | Value |
| Product Family | Siemens SIMATIC NET SCALANCE X116 |
| Device Type | Unmanaged Industrial Ethernet Switch |
| Total Port Count | 16 x 10/100 Mbps RJ45 ports with industrial grade pinouts |
| Power Supply Input | Redundant 24 V DC auxiliary inputs (9.6 V DC to 32 V DC operational range) |
| Diagnostic Elements | Front-facing LEDs for power status, link status, and network activity per port |
| Operating Temperature | -40°C to +60°C (-40°F to +140°F) ambient cabinet limit |
| Enclosure Rating | IP30 compact metal housing |
| Mounting Style | 35 mm standard DIN-rail or wall mounting configuration |
4. Global Compliance & Industry Certifications
Substation and manufacturing automation auditors enforce strict electromagnetic and environmental standards for networking hardware deployed near heavy drives and switchgear.
- Expected Certifications: CE Mark, cULus Listed industrial control equipment approvals, ATEX / IECEx hazardous location ratings (Zone 2), and PROFIBUS/PROFINET compatibility alignment.
- Safety Relevance: High galvanic isolation across port interfaces prevents ground-loop currents and high-voltage common-mode transients from migrating between control network segments.
- Audit Directive: Verify specific lot tracking and revision tags. Ensure manufacturing serial codes align with plant network lifecycle logs and cybersecurity asset inventories.
5. Long-Term Storage & Asset Preservation Guide
Industrial switches kept in warehouse reserve stock degrade prematurely if environmental baselines are neglected.
- ESD Protection Integrity: Keep the unit sealed inside its original metallized anti-static shielding bag to protect internal transceiver chips from electrostatic discharge.
- Climate Management: Maintain warehouse relative humidity strictly below 95% non-condensing, avoiding rapid temperature swings that cause internal micro-condensation.
- Connector Protection: Keep protective plastic dust covers firmly seated on all unused RJ45 ports to prevent airborne dust or particulate accumulation.
6. Physical Installation Prerequisites
Proper mechanical panel mounting and grounding discipline are mandatory to ensure data packet integrity and high-noise immunity.
- Convection Clearances: Leave at least 50 mm of unobstructed vertical clearance above and below the switch housing to maintain adequate natural thermal convection.
- Grounding Connection: Secure the low-impedance grounding screw on the underside of the chassis directly to the cabinet ground bus using a short copper braid.
- Power Redundancy: Wire both redundant 24 V DC power inputs to independent circuit feeds to maximize network uptime against single-source power failure.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to global shipments of this industrial switch?
A: Industrial network switches, routers, and data communication equipment typically clear under HS Code 8517.62 (Machines for reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus). Confirm exact regional sub-headings with your customs broker.
Q: Does importing this networking spare part require an authentic Certificate of Origin (COO)?
A: Yes. Securing a formal Certificate of Origin from your vendor verifies manufacturing traceability, which is vital for quality assurance compliance and customs clearance.
Q: Is network configuration or programming required before installing this switch?
A: No. Because this is an unmanaged SCALANCE X116 device, it operates strictly via plug-and-play switching without software setup, IP addresses, or configuration files.
