Description
1. Unboxing & Physical Snapshot
- Model & Brand: Siemens / SIMATIC HMI — TP1900 Comfort Panel (
6AV2124-0UC02-0AX0). - Physical Dimensions: Approximately 483mm x 337mm x 73mm (bezel footprint and backplane projection).
- Estimated Shipping Weight: 7.56 kg (heavy corrugated layers and edge cushions included).
- What’s in the Box: Touch display unit, metal mounting clips, power connector block, protective front gasket, and paper startup documentation.
2. Product Introduction
Mounting directly into enclosure doors or operator consoles, this 19-inch hardware connects cleanly into plant automation networks via dual-port PROFINET switches. The heavy die-cast aluminum bezel seals tightly against the steel cabinet wall using the provided retaining clips, which is critical for maintaining an airtight environmental barrier.
Engineered for dense control rooms, the internal layout uses passive convection channels rather than mechanical fans. Technicians rely on this operator interface to visualize complex automation processes while maintaining rigorous plant uptime standards.
3. Core Technical Specifications
| Parameter | Value |
| Display Type | 19-inch TFT widescreen (16 million colors) |
| Resolution | 1366 x 768 pixels |
| User Memory | 24 MB configuration memory |
| Operating System | Windows CE 6.0 kernel |
| Input Voltage | 24V DC nominal (19.2V to 28.8V DC permissive range) |
| Power Consumption | 36W typical operating draw |
| Communication Ports | 2x PROFINET, 1x MPI/PROFIBUS DP, 2x USB |
| Front Enclosure Rating | IP65 / NEMA 4X / Type 1 (flush mounted) |
4. Global Compliance & Industry Certifications
- Regulatory Approvals: CE Mark, UL/cUL Listed for industrial control equipment, c-Tick, and KC markings.
- Marine Standards: Meets primary marine certifications (DNV GL, ABS, LR) when installed with certified enclosure filters.
- Compliance Significance: The UL/cUL Listed certification confirms that the internal power circuitry adheres to rigorous North American safety standards, preventing electrical insulation failure.
- Audit Note: Verify specific lot certifications with OEM documentation prior to final site sign-off.
5. Long-Term Storage & Asset Preservation Guide
Keep the unit inside its original anti-static (ESD) shielding bag and corrugated container to protect the sensitive analog resistive touch overlay from pressure distortion.
Maintain storage room relative humidity below 60% to prevent oxidation on the rear RJ45 communication pins and terminal blocks. Inspect the onboard lithium backup battery annually, or disconnect it if long-term warehouse storage exceeds three years to eliminate electrolyte leakage risks onto the mainboard.
6. Physical Installation Prerequisites
- Convection Clearance: Leave at least 50mm of vertical and horizontal clearance behind the display inside the enclosure to permit passive airflow across the anodized heatsink.
- Grounding Requirements: Fasten a low-impedance copper braided strap from the rear functional earth terminal directly to the enclosure mounting panel to dissipate high-frequency electrical noise.
- Cutout Precision: Machine the door opening strictly to 465mm width x 337mm height to ensure uniform compression of the perimeter gasket.
7. Buyer’s FAQ (Logistics & Compliance Focus)
- Q: What Harmonized System (HS) Tariff Code applies to global shipments of this HMI unit?
- A: Classified typically under HS code 8537.10 for electrical control panels and displays; verify exact chapters with your customs broker.
- Q: Does this hardware arrive with user project files pre-loaded?
- A: It ships with standard Siemens factory system software; application runtimes must be downloaded via TIA Portal during commissioning.
- Q: How does the Country of Origin (COO) impact international customs clearance?
- A: Originating primarily from Germany, the COO determines eligibility for preferential regional trade tariffs.
- Q: What cargo insurance coverage protects this electronic asset during transit?
- A: Secure comprehensive “All-Risk” transit insurance with shock-recording sensors attached to the exterior freight crate.
- A: Secure comprehensive “All-Risk” transit insurance with shock-recording sensors attached to the exterior freight crate.
