Description
Unboxing & Hardware Overview
- Manufacturer & Architecture: Schneider Electric (Thalassa / PanelSeT PLA Enclosure Range)
- Part Number / Model: NSYPLA554G (Catalog Designation: Floor-Standing Polyester Enclosure, Completely Sealed)
- Product Type: Heavy-Duty Modular-Design Polycarbonate/Polyester Enclosure with Plain Door
- Physical Dimensions: 500 mm (Height) x 500 mm (Width) x 420 mm (Depth)
- Estimated Shipping Weight: ~24 to 28 lbs (11 to 13 kg) encased in industrial recycled cardboard packaging and protective edge guards
- Primary Condition Status: Factory New / Standard OEM Stock (verify specific backplate or accessory inclusions with your supplier prior to dispatch)
Product Introduction
The Schneider Electric NSYPLA554G is a high-performance, floor-standing (or wall-mountable) enclosure manufactured from self-extinguishing, glass-reinforced polyester (GRP). Part of the Thalassa (PanelSeT PLA) product family, this enclosure is engineered specifically for harsh, corrosive, or outdoor industrial environments where traditional carbon steel enclosures would degrade due to chemical exposure, salt mist, or humidity.
With a completely sealed top and bottom structure, it delivers superior environmental protection while offering Class II electrical insulation capabilities to safeguard operators against internal electrical hazards.
Core Technical Specifications
| Parameter | Value |
| Product Model | NSYPLA554G (Thalassa PLA Series) |
| Enclosure Dimensions | 500 mm (H) x 500 mm (W) x 420 mm (D) |
| Material Composition | Glass-reinforced polyester (GRP) — highly resistant to corrosion and UV radiation |
| Color & Finish | Grey (RAL 7035), untreated surface finish |
| Door Type & Configuration | Single plain door, reversible with 120° opening capability |
| Locking System | 2-point lock mechanism featuring a 5 mm double-bar insert |
| Ingress Protection (IP) | IP65 (dust-tight and protected against low-pressure water jets) |
| Impact Resistance (IK) | IK10 (resistant to high mechanical impact energy up to 20 joules) |
| Fire Resistance | Tested up to 960°C in compliance with IEC 62208 |
| Operating Temperature | -40°C to +70°C (-40°F to 158°F) standard industrial range |
Compliance & Standards Alignment
- Manufactured in compliance with IEC 62208 standards for empty enclosures.
- Class II Electrical Insulation: Double-insulated design eliminates the requirement for protective earth grounding connections on the enclosure body itself.
- Certified with NEMA 1, 2, 12, and 13 protection ratings.
Technical Note: Because polyester enclosures can accumulate static charge in specific hazardous areas, evaluate potential electrostatic risks if deploying this enclosure in explosive atmospheres (ATEX zones), and use appropriate grounding straps or anti-static cleaning procedures if required.
Storage & Asset Preservation Guidelines
- Store the enclosure in a clean, dry indoor warehouse environment protected from prolonged direct sunlight prior to installation to prevent any superficial UV stress on uninstalled gaskets.
- Keep the door latched during storage to maintain structural alignment of the frame and prevent warping of the composite body.
- Avoid placing heavy industrial components or stacked pallets directly on top of the composite enclosure shell.
Physical Installation Prerequisites
- Ensure that the mounting floor or wall structure is completely level and capable of supporting the combined weight of the enclosure, internal backplate, and heavy electrical components/transformers.
- Note that internal mounting plates (plain or perforated) and floor-stand plinths are typically ordered separately as modular accessories.
- When tightening cable glands through the bottom or side walls, use appropriate torque settings to avoid cracking or over-compressing the fiberglass composite material.
Buyer’s FAQ & Logistics
Q: What Harmonized System (HS) code applies to this polyester enclosure?
A: Plastic or fiberglass control boxes, electrical enclosures, and cabinet parts typically classify under HS code 8538.10 (Boards, panels, consoles for electric control… for base cabinets) or 3926.90 (Articles of plastics). Confirm final codes with your customs broker.
Q: Is the internal mounting plate included with part NSYPLA554G?
A: No. The NSYPLA554G designation refers to the empty enclosure shell; backplates, brackets, and inner doors must be sourced separately according to your internal layout requirements.
Q: Is the listed online price final for procurement?
A: Note: Price is subject to market availability, freight dimensions, and accessory bundling; contact our technical sales desk for a formal, time-sensitive quotation.
