Description
1.Unboxing & Physical Snapshot (Dynamic List)
-
Model & Brand: ProSoft Technology (Part Number: MVI56-PDPMV1 / ControlLogix PROFIBUS DP Master Communication Module)
-
Physical Dimensions: Standard Rockwell Automation ControlLogix single-slot module profile (Approximately 145 mm × 131 mm × 35 mm)
-
Estimated Shipping Weight: 0.80 kg (Including protective anti-static packaging and heavy export carton)
-
What’s in the Box: MVI56-PDPMV1 communication module, DB9 diagnostic cable, configuration software CD/documentation link insert, factory test report, and safety compliance insert.
-
2.Product Introduction (Randomized Structural Hook) Operating inside heavy industrial automation enclosures and continuous process control racks, this high-performance communication interface module encounters intense electrical noise, common-mode transients, and chronic cabinet vibration. The sophisticated multi-layer processor and transceiver layout demands strict optical and galvanic isolation to manage high-speed PROFIBUS DP V1/V2 network data streams accurately without introducing communication jitter or corrupting backplane memory.
Engineered specifically for the Rockwell Automation ControlLogix platform, the module slides securely into standard ControlLogix chassis slots where deterministic network master control is mandatory for plant-wide data exchange. Every surface-mounted transceiver and edge connector is built to sustain round-the-clock operation in severe manufacturing environments.
3.Core Technical Specifications | Parameter | Value | | :— | :— |
| Manufacturer / Family | ProSoft Technology / Rockwell Automation ControlLogix Series |
| Module Type | PROFIBUS DP Master Communication Module (Supports DPV1/DPV2) |
| Backplane Current Load | 800 mA at 5 V DC / 3 mA at 24 V DC |
| Network Protocol / Interface | PROFIBUS DP-V1 Master (RS-485 optically isolated port) |
| Operating Temperature Range | 0°C to +60°C |
| Enclosure Protection Class | IP20 (Requires certified industrial control cabinet installation) |
| Net Weight | 0.550 kg |
-
Global Compliance & Industry Certifications Plant safety and automation auditors will immediately reject any uncertified communication card integrated into critical PLC backplanes. This hardware tier aligns with stringent international industrial standards.
-
Expected Certifications: CE Mark, UL/cUL Listed, CSA, ATEX Class I Division 2 hazardous location compliance, and ISO 9001 manufacturing traceability.
-
Compliance Significance: The UL, CE, and hazardous location designations confirm that internal low-voltage insulation barriers and transient suppression circuits satisfy rigorous safety standards, mitigating electrical fault risks during active control operations. (Verify specific lot certifications with OEM).
-
5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine) Critical PLC communication spares kept in warehouse reserve require rigorous environmental controls to prevent micro-contamination and component degradation prior to cabinet installation.
-
Maintain a climate-controlled storage facility where ambient relative humidity stays strictly below 60 percent, preventing moisture accumulation from oxidizing gold-plated backplane connector pins and solder joints.
-
Keep the board permanently sealed inside its original anti-static (ESD) shielding bag and moisture-barrier packaging to protect sensitive integrated logic microchips from electrostatic discharge.
-
If storage exceeds a three-year cycle, have an instrument technician inspect all onboard connector pins and check electrolytic capacitors for physical wear before field staging.
-
6.Physical Installation Prerequisites ControlLogix rack layout requires strict adherence to manufacturer spacing specifications to maintain proper thermal convection and electrical clearance.
-
Leave at least 50mm of unobstructed vertical clearance above and below the card chassis assembly to facilitate natural air convection across internal circuit components.
-
Mount securely into its designated ControlLogix chassis slot, ensuring the top and bottom latching mechanisms are fully locked to establish a low-impedance bond directly to the grounded chassis backplane.
-
7.Buyer’s FAQ (Logistics & Compliance Focus)
-
Q: What Harmonized System (HS) code applies to international shipments of this communication module?
-
A: Industrial PLC communication cards and electronic control parts typically fall under HS code 8538.90 (Parts suitable for use solely or principally with electric control apparatus). Verify exact classifications with your customs broker.
-
-
Q: Does this hardware arrive pre-loaded with network node configuration parameters?
-
A: Replacement inventory ships as baseline hardware; specific PROFIBUS master addresses, baud rates, and slave device mapping must be configured via Rockwell RSLogix 5000 / Studio 5000 Add-On Profiles (AOP) during commissioning.
-
-
Q: How does the Country of Origin (COO) impact preferential import tariffs?
-
A: Manufacturing origin typically traces to the United States (US) or authorized global ProSoft Technology production facilities, which directly influences preferential trade documentation and duty calculations.
-
-
Q: Is specialized transit insurance mandatory for freight forwarding?
-
A: Yes, given the high replacement value and legacy criticality of ControlLogix communication hardware, comprehensive shock-monitored cargo insurance is strongly advised for global logistics.
-
