Description
1. Unboxing & Physical Snapshot
- Model & Brand: Notifier by Honeywell — RP-2002E (Releasing Fire Alarm Control Panel / FACP)
- Physical Dimensions: Approximately 368 mm x 368 mm x 108 mm (14.5 in x 14.5 in x 4.25 in locking steel cabinet enclosure).
- Estimated Shipping Weight: 7.5 kg (16.5 lbs) packed inside heavy corrugated housing with custom structural cardboard and foam retention inserts.
- What’s in the Box: RP-2002E main circuit board pre-installed in a red steel locking cabinet, internal power supply assembly, key locks, battery jumper cables, user operating manual, and compliance documentation (note: standby batteries and end-of-line resistors are ordered separately).
2. Product Introduction
Life-safety and asset protection within critical industrial control rooms, server facilities, and hazardous equipment enclosures require reliable, micro-processor-controlled fire suppression systems. Operating as a dedicated 4-zone releasing fire alarm control panel (FACP), the RP-2002E is engineered specifically for single- and dual-hazard deluge, preaction, and clean-agent agent release applications (—which ensures precise, automated timing sequences for pre-discharge alarms, abort switches, and main agent dumping valves).
Built with an intuitive keypad interface, extensive programmable event timers, and robust solenoid releasing circuits, the panel coordinates seamlessly with smoke detectors, manual release stations, and fire suppression actuators. Life-safety technicians and facility managers rely on this exact hardware model to safeguard mission-critical infrastructure against catastrophic fire events.
3. Core Technical Specifications
| Parameter | Value |
| Product Series | Notifier Releasing Fire Alarm Control Panels (RP-2002 Series) |
| Panel Type | 4-Zone Agent Releasing Control Panel (Export/International “E” Version) |
| Input Power Voltage | 240 VAC, 50 Hz (International European configuration) |
| Initiating Device Circuits (IDCs) | 4 conventional zones (compatible with 2-wire detectors) |
| Notification Appliance Circuits (NACs) | 2 programmable output circuits (regulated 24 VDC) |
| Releasing Circuits | 2 discrete hazard output circuits for solenoids or actuators |
| Auxiliary Power / Standby | Dual sealed lead-acid battery charger capacity (up to 18 AH in cabinet) |
| Operating Temperature | 0^\circC to +49^\circC (32^\circF to 120^\circF) |
| Storage Temperature | -20^\circC to +70^\circC (-4^\circF to 158^\circF) |
| Enclosure Construction | Heavy-duty steel cabinet with red baked-enamel finish |
4. Global Compliance & Industry Certifications
Regulatory life-safety audits require strict compliance documentation before authorizing any fire suppression control panel for occupancy or facility sign-off.
- Certifications: UL Listed (UL 864 9th Edition), ULC Certified, FM Approved (Factory Mutual), CE Mark, and local fire authority having jurisdiction (AHJ) standards.
- Safety Relevance: The UL 864 and FM approvals guarantee that backup power switching, zone supervision circuits, and emergency solenoid release paths meet rigorous life-safety performance standards without risk of false actuation or signal failure.
- Audit Note: Verify specific regional fire code listings (such as EN54 or UL compliance depending on your local jurisdiction) and AHJ submittal approvals prior to final wall mounting and wiring tie-ins.
5. Long-Term Storage & Asset Preservation Guide
Spare fire alarm control panels stored in warehouse stockrooms face electronic component degradation and enclosure rust over extended durations (—requiring strict environmental controls to protect inventory). Preserve your investment by executing these procedures:
- Maintain indoor warehouse climates where ambient storage temperatures stay between -10^\circC and +50^\circC while keeping relative humidity strictly below 85% non-condensing.
- Keep the panel locked inside its original factory protective box alongside active desiccant pouches until the exact mechanical wall-mounting window.
- Inspect the internal terminal blocks and circuit board traces annually for dust accumulation, brushing surfaces gently with clean, dry compressed air if needed.
6. Physical Installation Prerequisites
Proper mechanical wall anchoring and high-voltage AC line separation ensure system reliability and code compliance.
- Clearance Space: Mount the steel cabinet securely at eye level on a flat, vibration-free wall surface, leaving at least 150 mm of clear space around the perimeter for door swing and conduit entries.
- AC Power Requirements: Route incoming 240 VAC power via dedicated, unswitched metal conduit directly into the labeled primary power terminals; ensure a low-impedance earth ground wire is securely fastened to the cabinet grounding stud.
- Battery Handling: Install compatible 24V standby lead-acid batteries last, connecting polarity precisely to prevent internal fuse blowing or charger damage.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to this Notifier fire panel for international shipping?
A: Fire alarm control panels and electrical signaling apparatus typically classify under HS code 8531.10.0035 (Electric sound or visual signaling apparatus: Burglar or fire alarms and similar apparatus: Panels). Always verify codes with your broker.
Q: Does the “E” suffix designate a specific power supply configuration?
A: Yes, the “-E” suffix indicates the international version designed to handle 240 VAC input power requirements rather than standard North American 120 VAC lines.
Q: What is the Country of Origin (COO) for trade compliance record-keeping?
A: This safety hardware is manufactured in designated global electronics facilities, requiring precise country declarations on commercial import paperwork.
Q: Is specialized transit insurance required for international cargo delivery?
A: Yes, because heavy steel backboxes and internal printed circuit boards are vulnerable to severe drop impacts and corner crushing, full-value freight insurance is strongly recommended.
