Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: Bosch Rexroth VT-VRPD-2-2X/V0/0-0-1 (Material No. R901066987)
ManualsLib+ 1
- Physical Dimensions: 100 mm x 160 mm x 20 mm (Standard Eurocard format, approximate W x H x D)
- Estimated Shipping Weight: 0.4 kg (Packaged in anti-static foam containment)
- What’s in the Box: Printed circuit board assembly with front-panel diagnostic LEDs, D-Sub configuration port, and factory inspection sign-off sheet.
- 2.Product Introduction Electrical noise and control signal drift inside heavy industrial press environments challenge closed-loop hydraulic positioning accuracy. Engineers slide this digital amplifier card directly into standard 19-inch subracks, routing proportional valve feedback signals through high-density multi-point edge connectors (—which is critical for maintaining sub-millimeter actuator repeatability).
Precision motion control loops demand strict mitigation of electromagnetic interference to prevent erratic spool displacement. Ensure all analog command wiring utilizes shielded twisted pairs terminated properly to ground terminals before energizing the rack.
3.Core Technical Specifications
- Supply Voltage: 24 VDC nominal (19.4 VDC to 35 VDC)
- Power Consumption: 50 W maximum including valve solenoids
- Heat Dissipation: 18 BTU/hr baseline thermal output
- Processor Architecture: Integrated microcontroller with onboard digital PID control
- Memory Limits: Non-volatile flash storage for parameter configuration sets via BODAC software
- Operating Temperature: 0°C to +50°C ambient enclosure conditions
- Vibration Resistance: Up to 1G operational acceleration conformance
- Interface Standard: Front-panel RS232 serial communication port
- 4.Global Compliance & Industry Certifications Auditors require documented traceability for motion control cards driving critical safety-related hydraulic axes. This electronics module complies with major industrial standards.
- CE Mark: Validates compliance with European Union electromagnetic compatibility (EMC) guidelines.
- UL/cUL Recognized: Confirms component safety for industrial control panel integration across North America.
- RoHS Conformance: Restricts hazardous substance usage in electronic manufacturing processes.
- IP20 Rating: Design standard for protected cabinet enclosure deployment.
Compliance Note: Proper enclosure integration ensures sensitive microprocessor components remain shielded from conductive particulate pollution. Verify specific lot conformity directly with Bosch Rexroth prior to final safety audits.
5.Long-Term Storage & Asset Preservation Guide Dormant electronic controller cards suffer from component degradation if humidity and electrostatic protection guidelines are neglected. Maintenance teams must store spare inventory under strict conditions.
Keep the Eurocard sealed securely inside its original anti-static (ESD) shielding bag to protect onboard CMOS logic gates from electrostatic discharge events. Maintain warehouse storage environments at a relative humidity level strictly below 60% to prevent micro-corrosion on the gold-plated edge connector fingers. If inventory logs show the card resting on shelves past 2 years, perform a controlled bench power initialization to verify microcontroller operation before field deployment.
6.Physical Installation Prerequisites Rack thermal parameters and backplane pin configurations dictate proper physical installation. Leave at least 30mm of clearance above and below the card slot to facilitate passive convection airflow across the surface-mounted components. Verify that your subrack utilizes a 64-pin multi-point female connector (Form G) matching the 2X-series hardware layout to prevent backplane pin damage.
- Buyer’s FAQ (Logistics & Compliance Focus)
- What is the correct HS Tariff Code for international customs transit? Digital electronic amplifier cards classify under international harmonized code 8538.90.0000, though verify specific country rulings with your broker.
- Does this replacement unit ship with pre-loaded configuration parameters? Units ship with factory default settings; technicians must upload specific machine parameter files via BODAC software before active hydraulic operation.
- How does the Country of Origin (COO) affect trade documentation? The verified COO determines trade agreement preferential status and must align perfectly with commercial invoice declarations to avoid border delays.
- Why is comprehensive shipping insurance critical for this asset? Delicate surface-mount microchips and board traces can experience hidden micro-fractures under heavy mechanical shock loads during express freight delivery.
