Description
- Beijer E1060 | CE Certified Operator Panel
- Mitsubishi E1060 | UL Listed Keypad HMI
- Beijer Electronics E1060 | Factory Sealed Terminal
- Beijer E1060 | 1.11 kg Authentic Graphic Panel
- Mitsubishi E1060 | ATEX Compliant Industrial HMI
- Model & Brand: Beijer Electronics / Mitsubishi E1060 (E1000 Series HMI)
- Physical Dimensions: 275 mm x 168 mm x 63.3 mm (Approximate W x H x D including clearance)
- Estimated Shipping Weight: 1.11 kg (Packaged in custom anti-static foam containment)
- What’s in the Box: Operator terminal unit with powder-coated aluminum chassis, integrated membrane keypad, mounting clips, internal 2.0 AT fuse, and factory compliance documentation.
Panel builders mount this operator terminal directly into heavy steel enclosure cutouts, securing the bezel with uniform clamp pressure against the front gasket. Clean control floors demand reliable human-machine communication interfaces capable of enduring continuous operator inputs without mechanical fatigue (—which is critical for high-cycle packaging lines and manufacturing cells).
Wiring technicians route the shielded Ethernet and serial communication leads through dedicated low-voltage wireways, maintaining physical separation from high-current motor feeds. Fasten all terminal connections securely to prevent intermittent communication drops during heavy plant load transients.
| Parameter | Value |
| Display Type | 5.7 inch CSTN-LCD with 64K colors |
| Display Resolution | 320 x 240 pixels |
| Input Voltage | 24 VDC nominal (20 to 30 VDC range) |
| Power Consumption | 0.3 A normal, 0.5 A maximum draw |
| Onboard Memory | 12 MB project storage |
| Communication Ports | 1x Ethernet 10/100 Base-T, RS232, RS422/RS485, USB |
| Enclosure Protection | IP66 front panel, IP20 rear housing |
| Operating Temperature | 0°C to +50°C ambient range |
| Keypad Interface | 16 membrane keys with metal domes (1 million operations) |
Auditors inspecting operator interface stations require explicit documentation verifying environmental and electrical safety compliance. This terminal satisfies major industrial standards.
- CE Mark: Confirms adherence to European Union electromagnetic compatibility (EMC) and low-voltage directives.
- UL / cUL Listed: Validates North American industrial control equipment safety requirements for ordinary locations.
- ATEX / IECEx: Permits safe deployment in hazardous Class I Division 2 areas when housed inside approved purged cabinets.
- RoHS Compliance: Restricts hazardous chemical substances in electronic manufacturing processes.
Compliance Note: An IP66 front panel rating ensures high-pressure washdown sprays cannot penetrate the operator interface envelope during sanitation cycles. Verify specific lot certifications directly with Beijer or Mitsubishi prior to audit reviews.
Dormant operator terminals sitting in warehouse stockroom bins face display degradation and internal battery or memory drift if environmental controls fail. Asset managers must enforce rigorous preservation protocols.
Keep the terminal sealed tightly inside its original anti-static (ESD) moisture-barrier bag to shield sensitive microcontroller and display driver components from static discharge. Maintain warehouse storage temperatures between -20°C and +70°C with relative humidity kept strictly below 60% to prevent moisture condensation on the internal circuit boards. If inventory records indicate the unit has sat on a shelf past 2 years, connect a bench power supply to verify display backlight and memory integrity before field installation.
Enclosure cutout dimensions and thermal clearance dictate precise physical placement on the control panel door. Cut a precise opening measuring 240 mm by 130 mm into the steel door panel, ensuring all burrs are removed to allow proper gasket compression. Leave at least 50mm of internal clearance behind the rear housing to accommodate wiring bends and maintain convective airflow around the powder-coated aluminum chassis.
- What is the correct HS Tariff Code for customs processing?
Industrial operator interface terminals classify under international harmonized code 8537.10.9170, though verify regional rulings with your broker.
- Does this replacement terminal ship with pre-loaded project application software?
Units ship with factory baseline firmware; engineers must compile and download specific project files via E-Designer software before active machine control.
- How does the Country of Origin (COO) impact global trade compliance?
The verified COO dictates trade agreement qualification and must match commercial shipping paperwork to eliminate border customs clearance delays.
- Why is comprehensive transit insurance mandatory for this component?
Delicate LCD glass screens and internal display substrates can fracture under severe mechanical drop impacts during express freight transport.
