Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Brand & Model: Rockwell Automation / ICS Triplex Trusted System Power Cable Assembly (Type TC-004) — TC-004-02-4M5
- Physical Dimensions: 4.5 meters nominal length (custom variant configuration)
- Estimated Shipping Weight: 0.65 kg (Coiled within a heavy-duty moisture-resistant antistatic poly bag)
- What’s in the Box: Pre-terminated 4.5m multi-core power cable assembly, factory crimped connector housings, and compliance identification tags. (Note: Distribution module terminals and panel mounting clips are sold separately).
2.Product Introduction
This specialized power harness routes 24V DC power within fault-tolerant safety instrumented systems, bridging 15-way fused power distribution modules (such as the T8293 unit) directly to input VFTAs. Maintenance technicians route the flexible armored cable through high-integrity cabinets—which is critical for maintaining physical segregation between power feeds and safety-rated signal lines—ensuring uninterrupted energy delivery to critical processing nodes.
System safety audits mandate deploying genuine OEM-specified cabling over uncertified field-fabricated wire bundles. Utilizing this exact factory-assembled harness guarantees proper conductor cross-sectional area, low-resistance pin terminations, and rigorous insulation voltage ratings required for high-availability emergency shutdown loops.
3.Core Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer / Product Line | Rockwell Automation / ICS Triplex Trusted Safety System |
| Cable Type & Model | Type TC-004 Power Cable Assembly (Part No. TC-004-02-4M5) |
| Assembled Length | 4.5 meters (Extended non-standard configuration) |
| Application Routing | From 15-Way Fused Power Distribution Module (T8293) to Input VFTA |
| Conductor Insulation | High-temperature industrial grade flame-retardant PVC/XLPE |
| Voltage Rating | 24V DC nominal safety bus distribution |
| Enclosure Interface | Heavy-duty industrial plug-in connectors with secure locking latches |
| Approximate Weight | 0.65 kg (1.43 lbs) |
- Global Compliance & Industry Certifications
Auditors require complete documentation verifying that safety system internal wiring meets stringent international fire-retardant and electrical isolation standards. This cable assembly aligns with global industrial benchmarks, complying with low-voltage directives, CE conformity requirements, and hazardous environment installation codes associated with safety instrumented systems (SIS) up to SIL 3.
A certified cabling standard guarantees that inner conductor insulation will resist thermal aging and chemical breakdown inside sealed industrial panels, preventing short circuits that could trip redundant safety shutdown infrastructure. Verify specific lot certifications with OEM.
5.Long-Term Storage & Asset Preservation Guide (E-E-A-T Goldmine)
Spare industrial power cables stored improperly in facility stockrooms can suffer from PVC jacket plasticizer migration, stiffness, or terminal pin oxidation over extended multi-year holding periods. Keep the cable assembly coiled cleanly inside its original sealed antistatic bag, avoiding sharp bends or heavy stacking loads that can deform the outer insulation jacket. Store the asset on flat shelving in a temperature-controlled environment where ambient values remain between 10°C and 30°C and relative humidity stays strictly below 60 percent to prevent moisture absorption at the connector interfaces. Because this assembly contains no active electronic components, preservation relies entirely on avoiding direct ultraviolet exposure and physical crushing.
- Physical Installation Prerequisites
Route the cable cleanly through dedicated wire management raceways inside the safety cabinet, maintaining strict physical separation from high-voltage AC power feeds and variable frequency drive output cables to prevent electromagnetic coupling. Ensure both plug-in connector ends click firmly into their respective module headers, tightening any integrated retention screws to specified torque limits to withstand continuous plant vibration without loosening.
- Buyer’s FAQ (Logistics & Compliance Focus)
- What Harmonized System (HS) tariff code applies to international shipments of this cable assembly? Insulated electrical conductors and cable assemblies equipped with connectors typically fall under HS code 8544.42 (electric conductors for a voltage not exceeding 1000 V, fitted with connectors), though customs brokers should verify local codes.
- Does the cable require any special configuration or firmware programming? This is a passive analog power transmission harness requiring no software configuration, firmware flashing, or electronic setup prior to field installation.
- How does the Country of Origin (COO) documentation impact trade compliance? Official manufacturing country paperwork must match commercial shipping invoices precisely to clear customs checks smoothly without secondary tariff reviews or border delays.
- What level of freight insurance is advised during transit? Standard commercial parcel insurance covering full replacement value is recommended to protect against physical loss or damage during courier delivery.
