Description
1. Unboxing & Physical Snapshot
-
Model & Brand: GE Fanuc / Emerson VersaMax Series — 16-Point 120 VAC Discrete Input Module, Part Number IC200MDL240J-1000 (Base Model: IC200MDL240, Revision J, Bulk/Custom Packaging Suffix “-1000”).
-
Physical Dimensions: Standard VersaMax modular I/O carrier-mount profile (approx. 110 mm x 66.8 mm x 50.0 mm).
-
Estimated Shipping Weight: 0.40 kg (Including protective anti-static packaging and logistics carton).
-
What’s in the Box: IC200MDL240J-1000 module assembly featuring 16 positive logic (sourcing) AC input channels, front-panel status LEDs for point ON/OFF states and backplane power (
OK), backplane connector pins, and conformity insert. (Note: The snap-together I/O carrier base like the IC200CHSxxx series is ordered separately).
2. Product Introduction
Engineered for industrial automation environments, this discrete input module captures 120 VAC signals originating from field switches, pushbuttons, and proximity sensors.
Fitted onto a standard VersaMax snap-together carrier base inside a control panel, the hardware conditions and isolates AC signals before routing them across the backplane to the CPU. (Plant control engineers depend on this reliable input tier to interface standard industrial AC line devices securely with core PLC logic processors.)
3. Core Technical Specifications
| Parameter | Value |
| Product Family | GE Fanuc / Emerson VersaMax I/O System |
| Module Type | 16-Point Discrete AC Input Module |
| Nominal Input Voltage | 120 VAC (47–63 Hz) |
| Input Voltage Range | 0 to 132 VAC |
| Logic Type | Positive Logic / Sourcing Inputs |
| Input Current | 7 mA nominal per point |
| Response Time | 1 cycle max (ON) / 2 cycles max (OFF) |
| Backplane Power Draw | 110 mA maximum from 5V bus |
| Operating Temperature | 0°C to +60°C (+32°F to +140°F) |
| Mounting Style | DIN-rail mount via VersaMax snap-together I/O carrier base |
4. Global Compliance & Industry Certifications
Auditors and safety compliance officers overseeing industrial automation architectures enforce strict electrical isolation standards for AC interface hardware.
-
Expected Certifications: CE Mark, UL Listed, UL HazLoc Class I Division 2 hazardous location ratings, and RoHS environmental compliance.
-
Safety Relevance: High optical and dielectric channel-to-backplane isolation prevents field-side high-voltage AC transients from bridging into low-voltage internal PLC logic paths.
-
Audit Directive: Verify specific lot tracking and revision tags. Ensure the hardware suffix and revision code (Revision J) align precisely with the plant’s bill of materials and safety validation files.
5. Long-Term Storage & Asset Preservation Guide
Modular PLC I/O components kept in warehouse reserve stock degrade prematurely if environmental baselines are neglected.
-
ESD Protection Integrity: Keep the electronic module sealed inside its original metallized anti-static shielding bag to protect internal CMOS components from electrostatic discharge.
-
Climate Management: Maintain warehouse storage relative humidity strictly below 95% non-condensing, avoiding rapid thermal shifts that invite internal micro-condensation.
-
Terminal Pin Care: Protect the multi-pin connector interface on the rear of the module from mechanical bending or particulate contamination by storing units upright in standard slots or protective trays.
6. Physical Installation Prerequisites
Proper mechanical carrier seating and wiring discipline are mandatory to ensure reliable communication and prevent backplane disruption.
-
Carrier Alignment: Snap the module securely onto its designated VersaMax I/O carrier base, ensuring steady, balanced pressure so the rear pins engage cleanly without bending.
-
Hot-Swap Caution: Exercise extreme care if performing live replacements. Improper hot insertion can disrupt other active modules residing on the same serial or backplane bus. De-energize rack power when possible.
-
AC Wiring Separation: Keep high-voltage 120 VAC field wiring physically segregated from low-level analog and communication cables inside the panel wireways to eliminate electromagnetic interference.
7. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What Harmonized System (HS) Tariff Code applies to global shipments of this PLC input module?
A: Industrial programmable logic controller input/output modules typically clear under HS Code 8537.10 (Boards, panels, consoles for electrical control or distribution of electricity) or 8538.90. Confirm exact sub-headings with your customs broker.
Q: Does importing this VersaMax spare part require an authentic Certificate of Origin (COO)?
A: Yes. Securing a formal Certificate of Origin from your vendor verifies manufacturing traceability, which is vital for quality assurance compliance and customs clearance.
Q: Does this module include the terminal block carrier base?
A: No. The “-1000” suffix designates the electronic I/O module assembly; the matching DIN-rail snap-together terminal carrier base must be sourced separately.
