Description
- Model & Brand: FANUC A06B-6114-H205 (Alpha i SVM2-20/20i)
- Physical Dimensions: 380 mm x 60 mm x 170 mm (Approximate W x H x D)
- Estimated Shipping Weight: 4.2 kg (Packaged in dense anti-shock polyethylene foam)
- What’s in the Box: Dual-axis servo amplifier module featuring the anodized aluminum heat sink chassis, front-facing status display panel, connector plugs, and factory inspection test slip.
Subzero machining floors and severe continuous mechanical shock test every microchip inside high-speed CNC cabinets. Protecting multi-axis motion loops requires dual-channel drive hardware engineered to survive heavy ambient thermal stress and high-frequency electrical noise (—which is critical in high-throughput automotive production lines).
Cabinet technicians mount this twin-axis amplifier directly onto the sub-panel backplate, routing heavy-gauge power leads straight to the internal IGBT switching blocks. Maintain precise terminal torque specs during installation to prevent high-resistance micro-arcs during peak acceleration cycles.
| Parameter | Value |
| Input Voltage | 283 VDC to 339 VDC bus supply |
| Output Voltage | 240 VAC maximum per axis |
| Rated Output Current | L-axis 6.5 A, M-axis 6.5 A continuous |
| Power Rating | 5 kW nominal system capacity |
| Power Consumption | 25 W control circuit draw |
| Heat Dissipation | 170 BTU/hr thermal output |
| Operating Temperature | 0°C to +55°C ambient cabinet conditions |
| Vibration Resistance | 1G operational peak acceleration up to 500 Hz |
| Enclosure Protection | IP20 open-chassis terminal housing |
Auditors require strict compliance documentation for high-voltage motion control equipment operating within automated safety cells. This drive unit satisfies major international regulatory standards.
- CE Mark: Confirms compliance with European Union low-voltage and electromagnetic compatibility directives.
- UL/cUL Listed: Validates electrical safety compliance for industrial control equipment across North America.
- ATEX / IECEx: Permits deployment in hazardous Class I Division 2 atmospheres when enclosed inside purged cabinets.
- RoHS Conformance: Restricts hazardous chemical substances in electronic component manufacturing.
Compliance Note: A UL listing guarantees that internal creepage distances prevent electrical fire propagation during catastrophic component shorts. Verify specific lot conformity directly with FANUC prior to annual plant safety inspections.
Dormant servo amplifiers sitting on warehouse racks face internal electrolytic capacitor dry-out and micro-corrosion if environmental parameters escape strict control limits. Maintenance teams must execute precise preservation steps.
Keep the module sealed tightly inside its original anti-static (ESD) moisture-barrier bag to protect the delicate gate-driver chips from static discharge. Maintain storage vault humidity levels strictly below 60% relative humidity to prevent oxidation on the high-density edge connector pins. If inventory logs show the amplifier resting on shelves past 24 months, connect a variable DC power supply to safely reform the internal DC-bus capacitors before mounting the unit into a live machine tool.
Thermal dynamics inside the electrical enclosure dictate exact physical placement constraints. Leave at least 80mm of vertical clearance above and below the amplifier chassis to permit unobstructed natural convection airflow across the extruded aluminum heat sink fins. Fasten the rear mounting plate securely to an unpainted, grounded metallic sub-panel to preserve low-impedance high-frequency earth continuity.
- What is the correct HS Tariff Code for international customs clearance?
Industrial servo amplifiers and static converters classify under international harmonized code 8504.40.9580, though verify regional rulings with your broker.
- Does this replacement amplifier ship with pre-loaded servo parameter software?
Units ship with factory baseline settings; machine builders must upload axis-specific parameter files via the CNC control interface before live motor tuning.
- How does the Country of Origin (COO) impact global trade compliance?
The verified COO dictates trade agreement qualification and must match commercial paperwork precisely to prevent border customs transit delays.
- Why is comprehensive shipping insurance mandatory for this component?
High-density power electronics contain heavy internal magnetic transformers and ceramic substrates that fracture under severe mechanical drop impacts during freight shipping.
