Description
1.Unboxing & Physical Snapshot (Dynamic List)
- Model & Brand: FANUC A06B-0227-B400 (Alpha a8/3000i)
- Physical Dimensions: 130 mm frame diameter x 210 mm overall length (Approximate cylindrical envelope excluding shaft)
- Estimated Shipping Weight: 12.5 kg (Packaged inside custom high-density industrial foam cushioning)
- What’s in the Box: AC servo motor assembly with ribbed aluminum housing, integrated 24V holding brake, a1000iA absolute encoder, straight drive shaft, and factory quality test inspection tag.
2.Product Introduction
Cutting fluid mist, heavy metallic swarf, and aggressive thermal cycling test every millimeter of your machine tool axis drives. Protecting continuous machining uptime requires servo hardware designed to survive harsh workshop contaminants (—which is vital for high-speed CNC milling centers running unattended overnight shifts).
Maintenance technicians bolt this cast-iron front flange directly onto the machine casting, mating the precision ground shaft to the ballscrew coupling. Ensure proper alignment tolerances during installation to prevent excessive radial load from wearing out the internal radial bearings prematurely.
3.Core Technical Specifications
| Parameter | Value |
|---|---|
| Rated Output Power | 1.6 kW |
| Rated Torque | 8.0 Nm |
| Maximum Rated Speed | 3000 RPM |
| Rated Current | 5.4 A (3-phase) |
| Input Voltage | 182 VAC @ 200 Hz nominal |
| Holding Brake Voltage | 24 VDC (integrated static brake) |
| Encoder Type | a1000iA Absolute Encoder |
| Ingress Protection | IP65 standard shaft sealing |
| Operating Temperature | 0°C to +40°C ambient |
| Weight (Bare Motor) | 10.2 kg |
- Global Compliance & Industry Certifications
Auditors require documented safety verification for high-torque motion actuators operating within automated industrial work cells. This motor complies with essential international regulatory frameworks.
- CE Mark: Confirms compliance with European Union low-voltage and electromagnetic compatibility directives.
- UL/cUL Recognized: Validates component electrical safety standards for industrial machinery across North America.
- ATEX / IECEx: Permits deployment within explosive Class I Division 2 locations when integrated with approved explosion-proof cabling and drives.
- RoHS Compliance: Restricts hazardous chemical substances in electronic component manufacturing.
Compliance Note: A UL component recognition rating ensures internal winding insulation withstands thermal stress without dielectric breakdown during over-current faults. Verify specific lot certifications directly with FANUC prior to final plant safety audits.
5.Long-Term Storage & Asset Preservation Guide
Motors sitting idle on warehouse shelves face internal bearing grease separation and moisture accumulation if environmental safeguards are neglected. Asset managers must enforce rigorous preservation protocols.
Manually rotate the drive shaft one full revolution every three months to redistribute lubricating grease across the precision ball bearings and prevent localized raceway bruising. Keep the motor stored in a climate-controlled room with relative humidity strictly below 60%, leaving the original protective plastic cap fitted tightly over the machined pilot surface. Ensure the terminal box and encoder plug remain sealed with desiccant packs inside anti-static wrap to stop contact pin oxidation.
6.Physical Installation Prerequisites
Mechanical coupling alignment dictates operational longevity for high-speed servo actuators. Leave at least 50mm of clearance around the ribbed aluminum housing to allow adequate convective heat transfer away from the stator windings. Verify that the mating mounting surface is flat and free of burrs before torquing the four flange mounting bolts down to factory specification.
- Buyer’s FAQ (Logistics & Compliance Focus)
- What is the correct HS Tariff Code for international customs clearance?
Industrial AC servo motors classify under harmonized code 8501.52.8040, though verify exact country rulings with your customs broker.
- Does this replacement motor include the absolute encoder pre-calibrated?
Units ship with the standard a1000iA absolute encoder installed; technicians must perform a zero-point return reference procedure on the CNC controller after mechanical coupling.
- How does the Country of Origin (COO) impact global trade compliance?
The verified COO determines eligibility for regional trade agreements and must match commercial shipping paperwork to eliminate port-of-entry delays.
- Why is heavy-duty shock-absorbent transit insurance mandatory?
Precision-ground motor shafts and internal optical encoder discs can suffer micro-fractures under severe mechanical drop impacts during global freight transport.
FANUC A06B-6290-H207 Alpha i Servo Amplifier Module (SVM2-40/40iF) Fanuc A860-2010-T341 Alpha i-A 128 Pulse Coder (Encoder) Fanuc A860-2060-T321 Pulse Coder \alpha iAR128 Encoder
