Description
Meta Description
Get the technical breakdown, inventory guidelines, and drop-in alternatives for the B&R 8LMA33.D9045C000-0 synchronous servo motor. Secure factory-sealed spares today.
Version 1: Standard SEO Review Style
B&R 8LMA33.D9045C000-0 Synchronous Servo Motor
Replacing a failed axis motor on a high-speed production line requires matching exact electrical and mechanical constants. The B&R 8LMA33.D9045C000-0 is a high-performance synchronous servo motor designed for tight integration with ACOPOS servo drive families. This motor features specialized windings and feedback configurations tailored for precise dynamic positioning tasks.
Our warehouse currently maintains ready-to-ship, factory-sealed new surplus units along with fully tested refurbished options. We dispatch these precision motors globally within 24 to 48 hours, fully protected by our comprehensive 12-month component warranty.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | B&R Industrial Automation (Bernecker + Rainer) |
| Model Code | 8LMA33.D9045C000-0 |
| Motor Type | Permanent Magnet Synchronous Motor (PMSM) |
| Speed Rating | 4,500 RPM nominal |
| Feedback System | Integrated high-resolution encoder / resolver variant |
| Enclosure Rating | IP64 standard (verify shaft seal options for IP65+) |
| Cooling | Natural convection / uncooled surface |
Field Performance and Dynamic Integration
Deploying this motor in packaging or multi-axis pick-and-place lines shows the importance of matching your drive parameters exactly. The 8LMA33.D9045C000-0 operates with low rotor inertia, allowing acceleration curves that match aggressive machine cycles. If your drive trips on overcurrent during rapid deceleration, the issue is often a saturated braking resistor rather than a motor defect.
[ACOPOS Servo Drive] ---> [Power & Feedback Cables] ---> [8LMA33.D9045C000-0 Motor] ---> [Mechanical Gearbox/Load] According to EN 60034 rotational machine standards, insulation health is critical when operating under high pulse-width modulation (PWM) voltage stress from ACOPOS drives. The winding insulation system in this model handles high dV/dt transients, but running motor cables longer than 20 meters without proper line filters can accelerate winding degradation. Always check the shielding integrity of the feedback line during routine preventive maintenance to prevent positioning jitter.
Strengths and Integration Constraints
- Low Rotor Inertia: Enables high acceleration rates suitable for packaging applications.
- Compact Power Density: Delivers high stall torque relative to its physical frame size, saving space on moving axes.
- Feedback Dependency: Built-in encoder alignments are factory-set; replacing a damaged feedback housing in the field without OEM alignment fixtures is virtually impossible.
- Connector Wear: The speedtec circular connectors can fail if cables are installed with insufficient bend radiuses, pulling tension on the internal pins.
B&R 8BVI0220HCS0000-1 – ACOPOSmulti Inverter Module B&R 8BVP0440HC00.000-1 ACOPOSmulti Inverter Sourcing Strategy B&R 8AC122 ACOPOS plug-in module
